1 / 74

Rotational Molding

Rotational Molding. An Introduction to the Basics. Personal Introduction. R. Dru Laws Employed with Mity-Lite Engineering throughout and after schooling Bachelors in Mechanical Engineering From BYU Masters in Polymer Engineering From QUB (in Ireland)

Ava
Download Presentation

Rotational Molding

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rotational Molding An Introduction to the Basics

  2. Personal Introduction • R. Dru Laws • Employed with Mity-Lite Engineering throughout and after schooling • Bachelors in Mechanical Engineering • From BYU • Masters in Polymer Engineering • From QUB (in Ireland) • Engineering Director for Mity Fence Systems • Owner/Founder of RotoScientific

  3. Example Product

  4. Example Product

  5. Example Product

  6. Example Product

  7. Example Product

  8. Example Product

  9. Presentation Outline • Introduction • The Materials • The Machines • The Molds • The Method • Conclusion

  10. Introduction • Also known as rotomolding or rotocasting • Process for manufacturing large, hollow, one-piece plastic products • Best know for the manufacture of tanks and toys (Little-Tykes) • Suitable for small & complex shapes

  11. Introduction • Historical Development • 1850’s: Patent granted for rotomolding principle • 1910’s: Method used for chocolate products • 1940’s: Method used for vinyl plastisols • 1950’s: Invention of PE for the process • 1960’s: Rapid expansion in toy industry • 1970’s: Gradual expansion for technical products • 1990’s: Significant improvement in process control (at QUB)

  12. Introduction • 1500 Rotomolders around the world

  13. Introduction • North American Market Segments

  14. Introduction – The Process

  15. Introduction • Strengths • Small production runs • Large part capability • Low tooling costs • ‘Stress-free” products • Short product development lead times

  16. Introduction • Weaknesses • Slow cycle times • Limited material choices • Difficult to automate • Poor image • Low technology culture

  17. Presentation Outline • Introduction • The Materials • The Machines • The Molds • The Method • Conclusion

  18. The Materials

  19. The Materials • Low Zero Shear Viscosity is required to aid in the flow of the polymer within mold • MFI • Lower MFI resins – high strength products • Higher MFI – good surface finish and surface detail

  20. The Materials • Particle shape and size is crucial to the flow characteristics as the mold is rotating • Standard size is a 35 mesh powder (500 micron, 0.0197 inches)

  21. The Materials • Dry-flow/Bulk-density characteristics • Dry-flow is the time it takes 100 grams of resin powder to pass through a funnel of given dimensions • Bulk-density is the quantity of undisturbed powder than can fit inside a beaker of specified dimensions • Inversely proportional to each other

  22. The Materials

  23. The Materials • Other Material • Foams • Post-process • In-process • Liquid reactive polymers • Micro-pellets • Additives • Ceramics

  24. Presentation Outline • Introduction • The Materials • The Machines • The Molds • The Method • Conclusion

  25. The Machines • Rock-and-Roll • Clamshell • Vertical • Shuttle • Carousel • Fixed • Independent • Electric & Jacket

  26. Rock-and-Roll Machines

  27. Rock-and-Roll Machines

  28. Clamshell Machines

  29. Vertical Machines

  30. Shuttle Machines

  31. Fixed Carousel Machines

  32. Independent Carousel Machines

  33. Electric Machines

  34. The Machines • The “ARM” and “PLATE”

  35. Presentation Outline • Introduction • The Materials • The Machines • The Molds • The Method • Conclusion

  36. The Molds • Materials • Steel • Mild • Stainless • Aluminum • Cast • Machined • Plate

  37. The Molds • Anatomy • Frame and Spider • Two or more sections (with draft) • Parting line with alignment features • Clamping hardware and pry-points • Vent (breather) tubes • Texture and other features • Release agents

  38. The Molds – Frame and Spider

  39. The Molds - Mold Sections

  40. The Molds - Parting Line

  41. The Molds - Parting Lines

  42. The Molds - Parting Lines

  43. The Molds - Clamping Hardware

  44. The Molds – Pry Points

  45. The Molds - Vents

  46. The Molds - Vents

  47. The Molds – Kiss-Offs

  48. The Molds - Threads

  49. The Molds - Inserts

  50. Presentation Outline • Introduction • The Materials • The Machines • The Molds • The Method • Conclusion

More Related