1 / 27

Rotational Molding Blow Molding Thermoforming

Rotational Molding Blow Molding Thermoforming. Chapter 6.4,5,8. Rotational Molding. http://www.ferryindustries.com/rot_mold.html. class.et.byu.edu/.../ rotationalmolding.htm. Blow Molding. www.paarloplastics.com/ public/blowmolding.cfm. www.devco-design.com/ bl-mold.htm.

alika
Download Presentation

Rotational Molding Blow Molding Thermoforming

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rotational MoldingBlow MoldingThermoforming Chapter 6.4,5,8

  2. RotationalMolding

  3. http://www.ferryindustries.com/rot_mold.html

  4. class.et.byu.edu/.../ rotationalmolding.htm

  5. Blow Molding

  6. www.paarloplastics.com/ public/blowmolding.cfm

  7. www.devco-design.com/ bl-mold.htm

  8. www.riken.go.jp/lab-www/ mat-fab/blow/PETBlow.html

  9. Extrusion Blow Molding Animation (from Fluent, CFD software) www.fluent.com/software/ polyflow/blow.htm

  10. Blow Molding Animation (from Fluent, CFD software) www.fluent.com/software/ polyflow/blow.htm

  11. Thermoforming

  12. Vacuum Forming Vacuum Forming is accomplished by heating the plastic sheet until it is pliable enough to be vacuumed either into a female mold or over a male mold.                          www.pmwproducts.com/ thermoforming.html

  13. www.fluent.com/.../ thermoforming.htm

  14. Pressure Forming Pressure Forming is nothing more than Vacuum Forming with pressure assist to the forming process to enable crisper detail and sharper features. Pressure Forming utilizes pressurized air to push the heated sheet into the cavity. Pressure formed parts can resemble the detail of injection molded parts at a fraction of the tooling cost. www.pmwproducts.com/ thermoforming.html

More Related