WINFAB-S1-Data-Sheet-2020

1. PRODUCT DATA SHEET WINFAB S1 ® REINFORCING SUCCESS WINFAB S1 is manufactured using 100% agricultural grade wheat straw that is stitched into 1 layer of polypropylene netting. WINFAB S1 is excellent in holding seeds and soil in place while vegetation is developed. PROPERTY TEST METHOD ASTM D6818 ASTM D6475 ASTM D6525 ASTM D6567 ASTM D1117 - - TYPICAL ENGLISH 108 x 36.6 lbs/ft 8.0 oz/yd2 0.35 in 19.4% 432% 1/2 in x 1/2 in Photodegradable TYPICAL METRIC 1.58 x .57 kN/m 271 g/m2 8.9 mm 19.4% 432% 1.07 cm x 1.07 cm Photodegradable Tensile Strength Mass/Unit Area Thickness Light Penetration Water Absorption Net Opening Net Type PROPERTY TEST METHOD Measured Measured TYPICAL ENGLISH 8 ft x 112.5 ft 100 yd2 TYPICAL METRIC 2.44 x 34.29 m 83.61 m2 Roll Dimensions Roll Area Disclaimer: WINFAB assumes no liability for the completeness or accuracy of this information or the ultimate use of this information. WINFAB disclaims any and all implied, expressed, or statutory standards, guarantees, or warranties. This includes without limitation any implied warranty as to merchantability or fitness for a particular purpose or arising from a course of dealing or usage of trade as to equipment, materials, or information furnished herewith. This document should not be construed as engineering advice. Always consult the project engineer for project specific requirements. The end user assumes sole responsibility for the use of this information and product. The property values listed above are subject to change without notice. © 2018 WINFAB WINFAB | www.winfabusa.com 1 Nashville Mills Rd. Nashville GA 31639 Ph: (912) 534-5757 • Fax: (912) 534-5533