1 / 6

10G 1310nm 220m LRM SFP Transceiver

10Gb/s SFP 1310nm 220m Optical Transceiver is a very compact 10Gb/s optical transceiver module for<br>serial optical communication applications at 10Gb/s. GLSUN SFP-10G-LRM converts a 10Gb/s serial<br>electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial<br>electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI<br>specification.The high performance 1310nm FP transmitter and high sensitivity PIN receiver provide<br>superior performance for Ethernet applications at up to 220m links on MMF(300m links on SMF).

GLsun
Download Presentation

10G 1310nm 220m LRM SFP Transceiver

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SFP-10G-LRM-T02 10G 1310nm 220m LRM SFP+ Transceiver Product 10G 1310nm 220m LRM SFP+ Transceiver Model SFP-10G-LRM-T02 File No. SFP-10G-LRM-T02#141009 Version 1.0 Issuing Date 2020-6-4 Specification Revision Record Date Version Page Revision Description Prepare Approve 20200930 1.0 Liu YM All right reserved by Guilin GLsun Science and Tech Group Co., LTD. Without written permission, any unit or individual can’t reproduce, copy or use it for any commercial purpose. - 1 - Guilin GLsun Science and Tech Group Co., LTD. - 1 - Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com

  2. SFP-10G-LRM-T02 Product Description 10Gb/s SFP+ 1310nm 220m Optical Transceiver is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. GLSUN SFP-10G-LRM converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.The high performance 1310nm FP transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 220m links on MMF(300m links on SMF). The SFP+ Module compliants with SFF-8431, SFF-8432 and IEEE 802.3aq 10GBASE-LRM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission. Product Feature ● Supports 9.95 to 11.3Gb/s bit rates ● Hot-Pluggable ● Duplex LC connector ● 1310nm FP transmitter, MMF links up to 220m,SMF links up to 300m ● 2-wire interface for management ● Specifications compliant with SFF 8472 ● Digital diagnostic monitoring interface ● Power Supply : +3.3V ● Power consumption<1W ● Temperature Range: 0~ 70°C ● RoHS compliant Application ●10GBASE-LRM Ethernet ●Legacy FDDI multimode links ●SDH/SONET Aplication ●10G Fibre Channel Guilin GLsun Science and Tech Group Co., LTD. - 2 - Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com

  3. SFP-10G-LRM-T02 Optical Characteristics (TOP(C) = 0 to 70 ℃ ℃, TOP(I) =-40 to 85 ℃ ℃,VCC = 3.13 to 3.47 V) Parameter Symbol Min. Typ Max. Unit Note Transmitter 1290 -6 4 λ Operating Wavelength Ave. output power (Enabled) Extinction Ratio Ave. Launch power of TX OFF Dispersion penalty 1310 1330 0 nm dBm dB dBm dB PAVE ER POFF TDP 1 -30 3 Relative Intensity Noise Output Optical Eye RIN -128 dB/Hz Compliant with IEEE 0802.3ae Receiver 1260 Operating Wavelength Receiver Sensitivity Overload 1610 -10 0.5 nm dBm dBm PSEN1 PAVE 2 Receiver Reflectance LOS Assert LOS De-assert LOS Hysteresis Rrx Pa Pd Pd-Pa -12 dB dBm dBm dB -30 -16 0.5 Notes: 1. Average power figures are informative only, per IEEE 802.3ae. 2.Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 231-1with worst ER=4.5@ 10.3125Gb/s. Pin Defintion And Functions Guilin GLsun Science and Tech Group Co., LTD. - 3 - Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com

  4. SFP-10G-LRM-T02 Pin Symbol Name/Description 1 VEET [1] Transmitter Ground 2 Tx_FAULT [2] Transmitter Fault 3 Tx_DIS [3] Transmitter Disable. Laser output disabled on high or open 4 SDA [2] 2-wire Serial Interface Data Line 5 SCL [2] 2-wire Serial Interface Clock Line 6 MOD_ABS [4] Module Absent. Grounded within the module 7 RS0 [5] Rate Select 0 8 RX_LOS [2] Loss of Signal indication. Logic 0 indicates normal operation 9 RS1 [5] Rate Select 1 10 VEER [1] Receiver Ground 11 VEER [1] Receiver Ground 12 RD- Receiver Inverted DATA out. AC Coupled 13 RD+ Receiver DATA out. AC Coupled 14 VEER [1] Receiver Ground 15 VCCR Receiver Power Supply 16 VCCT Transmitter Power Supply 17 VEET [1] Transmitter Ground 18 TD+ Transmitter DATA in. AC Coupled 19 TD- Transmitter Inverted DATA in. AC Coupled 20 VEET [1] Transmitter Ground Notes: 1. 2. 3. 4. Module circuit ground is isolated from module chassis ground within the module. Should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V. Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module. Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot. RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module. 5. Serial Interface for ID and Digital Diagnostic Monitor GLSUN SFP-10G-LRM transceiver support the 2-wire serial communication protocol as defined in the SFP+ MSA. The standard SFP+ serial ID provides access to identification information that describes the transceiver’s capabilities, standard interfaces, manufacturer, and other information. Additionally, This SFP+ transceivers provide an enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range. The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X(A0h), so the originally monitoring interface makes use of the 8 bit address(A2h), so the originally defined serial ID memory map remains unchanged. The structure of the memory map is shown in Table1. Guilin GLsun Science and Tech Group Co., LTD. - 4 - Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com

  5. SFP-10G-LRM-T02 Table 1. Digital Diagnostic Memory Map (Specific Data Field Descriptions) Digital Diagnostic Specifications GLSUN SFP-10G-LRM transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics. Parameter Symbol Units Min. Max. Accuracy Note Transceiver temperature Transceiver supply voltage Transmitter bias current Transmitter output power Receiver average power Notes: 1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75 2. Internally measured 3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser DTemp-E DVoltage DBias DTx-Power ºC V mA dBm -45 2.8 2 -7 +90 4.0 80 +1 ±5ºC ±3% ±10% ±2dB 1,2 3 input DRx-Power dBm -16 0 ±2dB Typical Interface Circuit Guilin GLsun Science and Tech Group Co., LTD. - 5 - Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com

  6. SFP-10G-LRM-T02 Recommended power supply filter Notes: Inductors with DC resistance of less than 1Ω should be used in order to maintain the required voltage at the SFP input pin with 3.3V supply voltage. When the recommended supply filtering network is used, hot plugging of the SFP transceiver module will result in an inrush current of no more than 30 mA greater than the steady state value Package Dimensions Ordering Information Part Number Description SFP-10G-LRM-T02 SFP+, up to 10.3125Gb/s, 1310nm, 220m, 0~70℃(Comercial), -40~85℃(Industrial), with Digital Diagnostic Monitor Guilin GLsun Science and Tech Group Co., LTD. - 6 - Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com

More Related