1 / 13

Form 5 ™ Malleable Iron Conduit Outlet Bodies

Form 5 ™ Malleable Iron Conduit Outlet Bodies. Crouse-Hinds Training Module. Form 5 ™ Malleable Iron Conduit Outlet Bodies. Outline. Applications Features Certifications and Compliances Body Configuration Covers Creating a catalog number Marketing Materials.

Gabriel
Download Presentation

Form 5 ™ Malleable Iron Conduit Outlet Bodies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Form 5™ Malleable Iron Conduit Outlet Bodies Crouse-Hinds Training Module

  2. Form 5™ Malleable Iron Conduit Outlet Bodies Outline • Applications • Features • Certifications and Compliances • Body Configuration • Covers • Creating a catalog number • Marketing Materials

  3. Form 5 Conduit Outlet Bodies are used in conduit systems to: Act as pull boxes for conductors being installed Provide openings for making splices and taps in conductors Act as mounting outlets for lighting fixtures and wiring devices Form 5™ Malleable IronConduit Outlet Bodies Applications

  4. Connect conduit sections Provide taps for branch conduit runs Make 90°bends in conduit runs Provide access to conductors for maintenance and future system changes Form 5™ Malleable Iron Conduit Outlet Bodies Applications (continued)

  5. Form 5™ Malleable Iron Conduit Outlet Bodies Features Malleable iron construction provides high impact resistance and ductility Built-in rollers on 1 1/4” to 4” Type C and LB bodies to facilitate wire pulling Available threaded for rigid / IMC conduit Available in SnapPack Pre-packaged body, cover and neoprene gasket

  6. Form 5™ Malleable Iron Conduit Outlet Bodies Features Smooth and rounded integral bushings for protection of wire insulation Interchangeable with Appleton® Form 35® and O-Z/Gedney® malleable iron conduit outlet bodies Appleton and Form 35 are registered trademarks of EGS/Appleton Electric. O-Z/Gedney is a registered trademark of EGS/O-Z/Gedney.

  7. UL Standard 514B CSA Standard C22.2 No. 18 Form 5™ Malleable Iron Conduit Outlet Bodies Certifications and Compliances

  8. C LB LL LR Form 5™ Malleable Iron Conduit Outlet Bodies Available in seven body types: TTBX

  9. Domed for additional cubic capacity Stainless steel self retaining cover screws Form 5™ Malleable Iron Covers Sheet Steel Covers Neoprene Gaskets • Perforated center that can be easily removed

  10. Form 5™ Malleable Iron Covers Form 5 Cast Covers • Available in ½” – 4” • ½” through 2” covers are a flat design • 2½” through 4” are domed design. • Captive, stainless steel screws for attachment of cover to body. • Certified to UL and cUL standards.

  11. Form 5™ Malleable Iron Covers Integral Gasketed Covers • The Sheet Steel cover features a raised dome supplied with stainless steel screws supplied with nylon washers and gasket • Simplifies installation, reduces inventory and labor cost • UL and cUL listed and are NEMA 4 rated • Available in ½” – 4”

  12. Form 5™ Malleable Iron Conduit Outlet Bodies Creating a catalog number LB75M Body Type 50 = 1/2” Malleable iron C 75 = 3/4” LB 100 = 1” LR 125 = 1-1/4” LL 150 = 1-1/2” T 200 = 2” TB 250 = 2-1/2” X 300 = 3” 350 = 3-1/2” 400 = 4” SnapPack is available for the following configurations: LB, LR, LL, C & T ½” – 2” Simply add CG suffix to the part #

  13. Form 5™ Malleable Iron Conduit Outlet Bodies Marketing Materials • New Form 5™ Brochure • Competitive Cross Reference • www.crouse-hinds.com • Samples

More Related