300 likes | 1.35k Views
Servomax is the manufacturer of transformers including Power Distribution Transformer, Power Transformer, Distribution Transformer Manufacturers.
E N D
ENERGY EFFICIENT DISTRIBUTION TRANSFORMERS https://servomax.in
PRODUCTS • Power Transformer • Distribution Transformer • Isolation Transformer • Servo Stabilizer ( Air Cooled ) • Servo Stabilizer ( Oil Cooled ) • Servo Stabilizer (Single Phase) • Power Saver • Power Conditioner
ENERGY EFFICIENT DISTRIBUTION TRANSFORMERS ARE CLASSIFIED INTO 3 TYPES • Linear Load General Purpose Transformers: They are generally used for supplying appliance, lighting, heating, motorized machine and power loads from electrical distribution systems. • Non-Linear Load K-Factor Transformers: Energy efficient K-factor transformers are designed to tolerate heating due to harmonics associated with non-linear loads. • Harmonic Mitigating Transformers: Harmonic Mitigating transformers are superior to K-rated and general purpose Transformers in that they reduce voltage distortion (flat-topping) and power losses due to current harmonics created by single-phase, non-linear loads such as computer equipment.
K-Factor • It is an index of the transformer’s ability to carry harmonic currents while operating within the temperature limits of its insulating system. • K-Factor values range from 1 to 50. • Standard transformers have a K-factor of 1.0 and are assigned for linear loads only. K= [(I1/Irms)2 (1)2]+[(I2/Irms)2 (2)2]+[(I3/Irms)2 (3)2] +…………….+ [(In/Irms)2 (n)2] Where: I1 = fundamental current I2 = 2nd harmonic current I3 = 3rd harmonic current In = nth harmonic current Irms = RMS current
Distribution Transformer • Features • Design conforms to BIS 1180 & IS:2026, BS 171, IEC 76 and other • relevant standards • Latest manufacturing techniques to ensure cost • effectiveness and reliability • Designed for 25 years of trouble - free performance • Very low power loss and low noise • Optimum utilization of active materials for sleek design • Withstands electrical impulses, thermal and dynamic stresses https://servomax.in/distributiontransformers.html
Technical Specifications • Off-circuit tap changer to provide +5% to -5% in steps of 2.5% (or as specified by customer) • On-load tap changer to provide +5% to -15% in steps of 1.25% (or as specified by customer) • 3 Phase, 50 Hz in voltages of 11 KV, 22 KV and 33 KV • Continuous duty • Painting as per IS / IEC standards • Vector group Dyn 11 • Standard fittings as per IS: 2026 / IEC 76 / BIS 1180 • HV side cable box/Bare Bushings • LV side cable box / bus duct https://servomax.in/distribution-transformers.html
CONTACT DETAILS Reach out to Servomax Limited team on below mentioned address Corporate Office Customer Care: Servomax Limited, +91 911 1234567 Plot No: 118A, Road No: 70 Journalist Colony, Jubilee Hills, Hyderabad 500033, Telangana. Email info@servomax.in