How to Fix HP Printer Door Open Problem

1. How to Fix HP Printer Door Open Problem

2. How to Fix HP Printer Door Open Problem – But All the Doors are Closed Already The most common error that HP printer users encounter is the “Door Open” error message on the control panel of their printer or on the computer screen. Although the solution for this problem may seem simple, which is to close the opened printer door, but it actually gets complicated when all the doors are already closed. In such a case, most users don’t know what to do and how to fix this error in their HP printer. Don’t worry, because in this guide, we will tell you how to fix ‘Door Open’ problem in HP printer, but all the doors are closed.

3. Reason for HP Printer Door Open Problem There can be multiple reasons behind the ‘Door Open’ error of your HP printer. However, they can be broadly classified into two categories: door related and printer hardware related. Sometimes this error is related to the doors of the printer, but other times there can be some hardware problems due to some damaged part.

4. How to Fix Door Open Problem in HP Printer Inspect the door for any damage The first thing to do is to inspect your printer’s cartridge access door and make sure there is no physical damage. The cartridge door has no cracks or damage, the door hooks (which are meant to lock the door with the printer body) are not damaged, the door hinges work properly, etc. • If you find major physical damage to the cartridge door, you’ll need to replace the broken door with a new one. However, if the damage is minor, you can try to fix the door using duct tape. • If there is no damage to the cartridge door of your HP printer, then you should try the next step to fix “door open” error in HP printer. Check the Cartridge Access Door In this step, you need to check whether the cartridge door of your printer is closed properly or not. Follow the instructions below to complete this step: • Open your HP printer’s cartridge access door. • Close the cartridge door, but this time make sure all edges of the cartridge door are properly aligned with your printer body. Make sure the cartridge access door is properly seated. • The printer images shown above are for illustration only. You can find the correct way to open and close your printer’s cartridge access door by reading the Cartridges section of your HP printer’s User Guide. • If by following this step you were unable to resolve the “door open” error, try the next step below.

5. Check for obstructions in the doorway Since you assume there is no physical damage to the cartridge door and it is closing properly, there is only one thing left to check. Therefore, the next step to take is to check that there is no obstruction in the area where your cartridge door comes into contact with your printer body. • Again, open your printer’s cartridge door. • Carefully inspect the area around the cartridge door and ensure that there are no obstructions, such as packing material, pieces of paper, tape, etc., that may prevent the cartridge door from closing completely. Specifically, check around the area where the cartridge door contacts your printer’s door sensor. Even a small blockage in this area will almost certainly cause a “door open” error. • If you find any obstructions, carefully remove them and close the cartridge access door. • If this step fixed the “Door open” error in the HP printer, then good, if not then try the next solution below. Reset the HP Printer Since all the above steps failed to fix the “Door Open” error on your HP printer, the only solution is to reset the printer. To properly reset your HP printer, follow the steps below in the correct order: • Turn on your HP printer by pressing the “Power” button. • Unplug the USB cable attached to the back of your HP printer. • Unplug your printer’s power cord from the electrical outlet, and then remove the end of the power cord that is attached to the printer. • Wait 30 seconds. • Plug the power cord plug back into the power outlet, and then connect the other end of the power cord to your HP printer. • Press the “Power” button on the printer to turn on your HP printer. • Reconnect the USB cable to the back of your printer. • Try printing pages with your HP printer and the “door open” error will be resolved. However, if the problem persists, try the last step.

6. Contact HP Service Center If all of the above steps failed to resolve the “door open” error on your HP printer, it is likely that the problem is caused by a damaged, broken or faulty door sensor on your printer. HP. In such a situation, you should contact an HP service center and allow an HP service engineer to come and repair your HP printer. How to fix the door open issue in an HP printer? But all doors are closed is a common question we receive from HP printer users. We have tried to provide solutions to this problem which you can use to fix this error in your HP printer.