1 / 2

Commercial Conveyor Belting created with PTFE

Bombinobelts runs using a international range with our item service located in the United Empire. We can generate any type of PTFE covered glass fabric or Aramid (commonly known as Kevlar) to fit any size and kind of device on the market.

HarshalPatel
Download Presentation

Commercial Conveyor Belting created with PTFE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Commercial Conveyor Belting created with PTFE Belting made with PTFE coatings Belting is a terms used to explain general device belting which comes in a variety of styles and sizes and used in a variety of sectors. The area that bombinobelts focus’s on is within the market warm industry. This means that the device straps we generate are designed to function at higher and lower than average heat range ranges. To experience this PTFE (commonly generally known as Teflon) is used as the main component to cover the surface. This then provides the additional advantage of being a non stick creation that is useful in a variety of programs. The provision of such belting materials means device developers to create equipment that are used within meals manufacturing, fabric handling along with versatile product packaging and screen manufacturing. These are just a few illustrations. Bombinobelts runs using a international range with our item service located in the United Empire. We can generate any type of PTFE covered glass fabric or Aramid (commonly known as Kevlar) to fit any size and kind of device on the market. We welcome all enquired too from device / device developers where we have the main advantage of our technological item sales agents who can recommend particular areas that need to be considered when seeking to use a PTFE device buckle. The picture above reveals an example of shut incorporate belting however we also make belting from open capable material which allow ventilation. These are particularly useful for hot air drying out ranges such as ranges for fabric drying out / soothing and meals handling. Material Property :

  2. • Bombino's belts can operate continuously at 260'C and still maintain its operational profile. • Bombino's belts provide high percentage of open surface area, allowing maximum air flow, thus the power consumption is reduced while improving drying speed. Mesh sizes are 1x1 mm, 2x2 mm & 4x4 mm. • Dimensional stability - No shrinkage, almost zero elongation. • Non combustible & non-stick surface. • No heat setting required for Teflon belts. • Very good resistance to oil, grease, chemicals etc. • Very high tensile strength. • Width upto 4.2 meters available on request. If you would like to get any information about best ptfe fiberglass belts, then visit at Bombinobets.com please get touch with us at patel_pankil@hotmail.com or call on 9825023997 or Fax on 7926407727 where our Technical item sales agents will be only too grateful to assist.

More Related