20 likes | 36 Views
Curved glass is used in a wide range of contemporary applications. Whether it’s a curved glass balcony, a piece of curved glass furniture, a curved glass partition, a glass cover, an curved window, or even the glass display store fixtures.<br>TEL : 86-13500016166<br>E-mail :info@kong-da.com<br>Website:http://www.kongdafurniture.com
E N D
Furniture: What is a curved glass display? www.kongdafurniture.com Curved glass is used in a wide range of contemporary applications. Whether it’s a curved glass balcony, a piece of curved glass furniture, a curved glass partition, a glass cover, an curved window, or even the glass display store fixtures, the use of curved glass adds an extra dimension of beauty and visual appeal to the design. But have you ever thought about how the curved glass is made out, and how a curved glass display case is made out of curved glass. Today, let’s get to know the insights of curved glass. The process of converting flat glass to curved glass is highly specialized and time-consuming, so curved glass can often carry a much higher price tag than flat glass. Before this process begins, precise measurements of specific tasks are required. Based on these measurements, a steel die is designed to construct the curve radius and size of the final product. Then the next step is to cut the flat glass, which must be thoroughly cleaned and polished. If any dust or dirt particles, it may cause glass to crush during bending, so make sure it is absolutely clean. Ultraviolet light can be illuminated on the glass, which will highlight any small spots, which can help you to remove the dust. A mixture of detergent, clay and calcium carbonate is then applied to the glass, which prevents the glass from sticking to the mould during heating. Because the heating speed of steel is slower than that of glass, the steel die is preheated to about 480 degrees, and the glass can be placed on the mould and loaded into the kiln. Raising the temperature in the kiln to 700 °C can
soften and bend the glass, so it can take the shape of the mold. This modeling can be achieved either by gravity or by mechanical bending machines. The temperature in the kiln must be very carefully controlled at 700 °C, as any change of the oven temperature will result in uneven bending of the glass. When the glass is fully bent to the mold outline, it needs to be cooled gradually and gently for a few hours, and this slow cooling process can prevent the bending glass from cracking. Finally, you can use the curved glass to make your retail glass display. Kongdafurniture is a display showcase supplier,which has different kinds of display cabinet,cosmetic display,display furniture.