Most Reliable Cisco 352-001 CCDE Exam Dumps on Dumps4free

2.  Cisco CCDE Written Exam will validate that professionals have the expertise to gather and clarify network functional requirements, develop network designs to meet functional specifications, develop an implementation plan, convey design decisions and their rationale, and possess expert-level network infrastructure knowledge. Read More…

3. 1.0 Layer 2 Control Plane 24% 2.0 Layer 3 Control Plane 33% 3.0 Network Virtualization 15% 4.0 Design Considerations 18% 5.0 Evolving Technologies 10%

4.  Are You Struggling with Cisco 352-001 Exam And Want to Clear in First Attempt?  Dumps4free Provide You Best Cisco 352-001 Study Material. Try Our Demo Before Buy.  Dumps4free Also Offered 24/7 Online Support to Facilitate the Candidates in Every Possible Manner.  Here We Present You Cisco 352-001 Real Exam Questions.

5. A network design shows two routers directly connected to an Ethernet switch using optical connections. There is an OSPF adjacency between the routers. In this design, which solution will ensure that interface down detection is reported as quickly as possible to the IGP? A. optimized OSPF SPF timers B. Bidirectional Forwarding Detection C. automatic protection switching D. optimized OSPF LSA timers E. Ethernet OAM CFM monitoring Answer: B

6. A network designer is working with a company to improve convergence at the Layer 2 control plane and decides to use LACP. Which of these components does LACP use to create the system ID? A. LACP system priority and switch MAC address B. LACP port priority and switch MAC address C. LACP port priority and port number D. LACP system priority and port number Answer: A

7. A network designer is redesigning an enterprise campus network to ensure that Ethernet switches proactively attempt to reconnect after a fiber cut. In the design, they will have to address areas where fiber cuts exist on campus from past troubleshooting, where a single fiber is disconnected in the fiber pair, leading to looping. Which feature could be implemented in the design to allow the Spanning Tree Protocol on the switches to be protected? A. loop guard B. UniDirectional Link Detection C. UniDirectional Link Detection aggressive mode D. root guard Answer: C

8. Voice traffic between two campus enterprise networks is growing. The network designers decide to add a second 10-Mb Metro Ethernet service parallel to their original 10-Mb service in order to provide more bandwidth and diversity. The QoS profile will be the same on the new 10-Mb service due to the voice stability on the first Metro Ethernet link. When the second link is added to the OSPF domain, which traffic design consideration would have the most impact on the voice traffic when both links are active? A. per-destination IP address basis B. per-flow basis C. per-packet basis D. per-source IP address basis Answer: C

9. You are designing a network that will run EIGRP over a Metro Ethernet service that does not employ a link-loss technology. What will be the impact on convergence if there is a break in the end-to-end Layer 2 connectivity within the service provider network? A. The routers will immediately lose their adjacencies and converge. B. The routing protocol will not converge until the hold timers have expired. C. The switch ports connected to the router will go down and the routers will immediately converge. D. The VLAN on the switches will go inactive, the ports associated on the switch will go down, and the routers will immediately converge. Answer: B

11.  support@dumps4free.com  http://dumps4free.com/contactus.php  +1 213-742-2864  http://dumps4free.com  Los Angeles, CA 90001

12. 2016 © dumps4free.com