1 / 7

Buy Chassis Forging At Affordable Rates From KDK Forgings Co.

The chassis forgings, a crucial component of the ride control system, are the responsibility of KDK. Anti-roll bars are another name for them. A stabiliser bar's design takes into account numerous factors. A stabiliser bar can be used to balance forces both vertically and horizontally. They enhance overall ride control and aid in maintaining the flatness of the vehicle over curves and bumps. You may also find out more by going to KDK Forgings Co.

KDKForging340
Download Presentation

Buy Chassis Forging At Affordable Rates From KDK Forgings Co.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHASSIS FORGINGS

  2. Handhold Forgings Features Custom shapes and sizes Machine finished or otherwise Application based tapping of ends Up to 10' length Available in Stainless Steel or Carbon Steel Materials

  3. Product Description Hand holds or grab irons allow mobility of personnel in and around railcars. Hand holds are produced from carbon steels and from stainless steels and can be manufactured in a variety of configurations. KDK has tooling for most standard configurations currently in the railcar industry. Adjustable hand holds are also available that allow parts to be used in an application where multiple lengths are required. One end with a series of holes passes through the mating part and a pin is placed to secure the length.

  4. The excess portion of the bar can then be cut off. The mating portion of the hand hold can be manufactured by punching or for finer tolerances can be drilled. The shape of the attached foot area is dictated from the customer. Finish of the component is also dictated by the customer.

  5. The flat area of the hand hold is also known as a mounting flange and they are typically designed to be flat or flush with the mounting surface. They are then typically riveted or screwed to the surface of the railcar. Standards in producing handholds can be found at the American Association of Railroads website (www.aar.org) website. Hand holds can be used for passenger and industrial railcars. KDK hand holds are typically made of .75" or 1" dia. steel and can vary in length from 4" to 15 feet in length. They can be bent and an offset can be forged into the lenght of the bar. Additional services include powdercoating to specification and color.

  6. Experience KDK has produced handholds for over 30 years. We are very familiar with Handhold manufacturing standards. KDK produces handholds for the leading railroad car producers in North America. Applications KDK handholds are used in the railroad industry.

  7. THANK YOU https://kdkforging.com/ride

More Related