1 / 6

OHRIJA Charger HRH500 HRH600B HRH800 Charger Using Adjustable Resistance Calibration Instruction Manual

OHRNA brand belongs to Dongguan Hengruihong Technology Co., Ltd., which was established in 2020 and is headquartered in Dongguan, Guangdong Province, China. Our company is a high-tech enterprise integrating R&D, production and sales. The companyu2019s main products: lithium battery charger, lithium iron phosphate battery charger, lead-acid battery charger, golf cart charger, power adapter, switching power supply and other products.<br>

Lucky63
Download Presentation

OHRIJA Charger HRH500 HRH600B HRH800 Charger Using Adjustable Resistance Calibration Instruction Manual

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OHRIJA Charger HRH500 HRH600B HRH800 Charger Using Adjustable Resistance Calibration Instruction Manual OHRIJA Charger HRH500 HRH600B HRH800 Charger Using Adjustable Resistance Calibration Instruction Manual Tools to calibrate voltage and current need to be prepared: Torx screwdriver, small 1-word screwdriver, multimeter, ammeter. If there are other tools can also replace them. Calibrate voltage and current Step 1: Open the screws around the charger cover (red arrow part)

  2. After opening the cover, confirm the function of each knob. The charger with display screen needs to confirm the knob function of the display screen. The knob function is as follows:

  3. Calibration voltage:

  4. First use a multimeter to measure the voltage while using a 1-bit screwdriver to turn the VR1 knob to turn left to reduce the voltage. Turn right to increase the voltage. Note: 12V: can only be adjusted between DC 10V-17V, beyond which there is a risk of damage. 24V: can only be adjusted between DC 21V-30V, beyond which there is a risk of damage. 36V: can only be adjusted between DC 36V-45V, beyond which there is a risk of damage. 48V: can only be adjusted between DC 50V-59V, beyond which there is a risk of damage. 60V: can only be adjusted between DC 60V-73V, beyond which there is a risk of damage. 72V: can only be adjusted between DC 75V-89V, beyond which there is a risk of damage. Chargers with display need to be calibrated synchronously via the intermediate voltage knob on the display panel Note: The output voltage of the display screen and the charger needs to be consistent, with an error of about 10%. Calibration current: After connecting the load, use an ammeter to measure the current. Use a 1-bit screwdriver to turn the VR2 knob to turn left to reduce the current. Turn right to increase the current. Note: 12V: 500W chargers They can only be adjusted between DC 16A-20Amp, beyond which there is a risk of damage. 24V: 500W chargers They can only be adjusted between DC 13A-15Amp, beyond which there is a risk of damage. 36V: 500W chargers They can only be adjusted between DC 10A-13Amp, beyond which there is a risk of damage. 48V: 500W chargers They can only be adjusted between DC 6A-8Amp, beyond which there is a risk of damage. 60V: 500W chargers They can only be adjusted between DC 5A-6Amp, beyond which there is a risk of damage. 72V: 500W chargers They can only be adjusted between DC 4A-5Amp, beyond which there is a risk of damage. 36V: 600W chargers They can only be adjusted between DC 13A-15Amp, beyond which there is a risk of damage. 48V: 600W chargers They can only be adjusted between DC 8A-10Amp, beyond which there is a risk of damage. 60V: 600W chargers They can only be adjusted between DC 6A-8Amp, beyond which there is a risk of damage. 72V: 600W chargers They can only be adjusted between DC 5A-6Amp, beyond which there is a risk of damage. 60V: 800W chargers They can only be adjusted between DC 8A-10Amp, beyond which there is a risk of damage.

  5. 72V: 800W chargers They can only be adjusted between DC 6A-8Amp, beyond which there is a risk of damage. The charger with display screen needs to be calibrated synchronously through the knobs on both sides of the display board (coarse calibration and fine calibration) Note: The output current of the display screen and the charger need to be consistent, with an error of about 10%. Calibrate the third stage trickle charge current: After connecting the load, use the ammeter to measure the current. Turn the VR3 knob to the left to reduce the current. Turn the VR3 knob to the right to increase the current. Note: The third stage trickle charge current does not have to be adjusted. Summary: Since it is a live operation, special attention should be paid to safety. Tools should not be close to the AC input, In general, we only need to calibrate the voltage or current, and the trickle charging current in the third stage does not need to be adjusted. Chargers with a display need to be calibrated synchronously through the knob on the display panel, The output voltage and current of the display screen and the charger need to be consistent, with an error of about 10%. https://ohrija.com/

More Related