10 likes | 212 Views
WIND FARM NETWORKS PRODUCT SELECTION GUIDE. MS2108-2 MICE, Modular, Managed Industrial Ethernet 10/100 Base Switch and Chassis with 2 Available Slots for Media Modules, Shown Below, Allowing up to 8 Ethernet Ports. SNMP V.3 Interface EEC (Extended Environmental Conditions) Models Available.
E N D
WIND FARM NETWORKS PRODUCT SELECTION GUIDE MS2108-2 MICE, Modular, Managed Industrial Ethernet 10/100 Base Switch and Chassis with 2 Available Slots for Media Modules, Shown Below, Allowing up to 8 Ethernet Ports. SNMP V.3 Interface EEC (Extended Environmental Conditions) Models Available MS4128-5 POWER MICE, Modular, Managed Industrial Ethernet 10/100/1000 Base Switch and Chassis with 5 Available Slots for Media Modules Allowing up to 20 Ports. This Switch also has a Slot to Attach the MB-2T Chassis Extension Shown on the Far Right to Allow up to 28 Ports. The Slot to the Left of the Switch Supports Gigabit Ethernet and the MM4-4TX/SFP Module goes here. This Switch can also be Upgraded to a Layer 3 Routing Switch using Hirschmann’s Add-On Firmware. Giga-bit Hiper Ring has 50 m/sec or Less Heal Time. Supports 2 Hiper Rings. SNMP V.3 or Command Line Interface (CLI). MS3124-4 MICE, Modular, Managed Industrial Ethernet 10/100 Base Switch and Chassis with 4 Available Slots for Media Modules, Shown Below, Allowing up to 16 Ports. This Switch also has a Slot to Attach the MB-2T Chassis Extension Shown on the Far Right to Allow up to 24 Ports. SNMP V.3 Interface. MB-2T 2 Slot Chassis Extension for MICE Models MS4128-5 or MS3124-4 Modular Switches MM2-4TX1 MICE Media Module 4 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters MM2-2FXM2 MICE Media Module 2 Ports FX 100 Base Multi-Mode SC Connectors (50/125u/m) = 5000 Meters (62.5/125u/m) = 4000 Meters MM2-4FXM3 MICE Media Module 4 Ports FX 100 Base Multi-Mode MTRJ Connectors (50/125u/m) = 5000 Meters (62.5/125u/m) = 4000 Meters MM2-2FXS2 MICE Media Module 2 Ports FX 100 Base Single-Mode SC Connectors (9/125u/m) = 32.5 Kilometers MM2-4FXS2 MICE Media Module 4 Ports FX 100 Base Single-Mode SC Connectors (9/125u/m) = 32.5 Kilometers MM2-2FXM3/2TX1 MICE Media Module 2 Ports FX 100 Base Multi-Mode MTRJ Connectors (50/125u/m) = 5000 Meters (62.5/125u/m) = 4000 Meters 2 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters MM4-4TX/SFP POWER MICE (MS4128-5) Gigabit Media Module 4 Ports TX 10/100/1000 Base or FX 1000 Base or combination thereof RJ45 Connectors Cat 5 = 100 Meters Cat 6(1000 Base) = 100 Meters For FX, See SFP Fiber Optic Modules Chart Below. MM3-1FXM2/3TX1 MICE Media Module 1 Port FX 100 Base Multi-Mode SC Connector (50/125u/m) = 5000 Meters (62.5/125u/m) = 4000 Meters 3 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters MM3-2FXM2/2TX1 MICE Media Module 2 Port FX 100 Base Multi-Mode SC Connectors (50/125u/m) = 5000 Meters (62.5/125u/m) = 4000 Meters 2 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters MM3-1FXS2/3TX1 MICE Media Module 1 Port FX 100 Base Single-Mode SC Connector (9/125u/m) = 32.5 Kilometers 3 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters MM3-2FXS2/2TX1 MICE Media Module 2 Ports FX 100 Base Single-Mode SC Connector (9/125u/m) = 32.5 Kilometers 2 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters MM3-1FXL2/3TX1 MICE Media Module 1 Port FX 100 Base Single-Mode SC Connector (9/125u/m) = 24-86.6 Kilometers 3 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters RS2-FX/FX 7 Port Managed Rail Switch 2 Ports FX 100 Base Multi-Mode SC Connectors (50/125u/m) = 5000 Meters (62.5/125u/m) = 4000 Meters 5 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters RS2-FX-SM/FX-SM 7 Port Managed Rail Switch 2 Ports FX 100 Base Single-Mode SC Connectors (9/125u/m) = 32.5 Kilometers 5 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters RS2-FX-SM/FX/LH 7 Port Managed Rail Switch 1 Port FX 100 Base Single-Mode SC Connector (9/125u/m) = 32.5 Kilometers 1 Port FX 100 Base Single-Mode Long Haul with SC Connector (9/125u/m) = 24-86.5 Kilometers 5 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters RS2-FX-LH/FX-LH 7 Port Managed Rail Switch 2 Ports FX 100 Base Single-Mode Long Haul with SC Connectors (9/125u/m) = 24-86.5 Kilometers 5 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters RS2-4R-2MM-SC 4 Port Managed Rail Switch 2 Ports FX 100 Base Multi-Mode SC Connectors (50/125u/m) = 5000 Meters (62.5/125u/m) = 4000 Meters 2 Ports TX 10/100 Base RJ45 Connectors Cat 5 = 100 Meters SFP FIBER OPTIC MODULES M-SFP-SX/LCMM = 0.5 km M-SFP-LX/LCMM = 0.5 km SM = 20 km M-SFP-LH/LC SM = 3-70 km M-SFP-LH+/LCSM = 44-120 km Used with MM4-4TX/SFP Only EAGLE TX/TX Industrial Firewall VPN System Router, Single Client, Transparent (SCT) and Multi-Client (MCT), PPPoE, PPTP Models are also Available with Fiber Connections VIDOS Video Management Software for Camera Control and Surveillance. With a VIDOS NVR Add-On you can store up to 64 Video Nodes Simultaneously onto a Single-Hard Drive R-VIP-T Video to Ethernet Encoder/Decoder Converts Analog Camera Signal to MPEG4 30 Frames Per Second Pan/Tilt/Zoom 2 Relay Outputs – 1 Input On Board Web Server INDUSTRIAL HIVISION Operator Edition Network Management for Configuration of Alarm and Event Action for Industrial Networks HIVISION PC BASED INDUSTRIAL LINE Network Management Software for the Configuration and Monitoring of Industrial Line Devices Either Individually or Globally using Multi-Device Configuration Tools All Hirschmann Devices Shown Will Operate in 0-60 Degree Celsius at 10 – 95% Humidity. Some EEC (Extended Environmental Conditions) Models are available to Operate in -25 to 70 Celsius. They have also been designed to withstand heavy shock and vibration, resistance to electrostatic discharge, electromagnetic field, fast transients, surge voltage and conducted immunity. They carry Germanisher Lloyd Approvals for Marine Environments, conform to UL Standard 508, 1604 and 60950. Please see product catalog or data sheets for full compliance. 19” RACK MOUNT KIT For Mounting the Din Rail Mountable Switches into a 19” Rack PROFITEL IP TELEPHONE Industrial IP Telephone Systems V.24 TERMINAL CABLE For Configuration of Switch Through V.24 Serial Port AUTO CONFIGURATION ADAPTER – 11 For Saving Switch Configuration onto Memory Card for Instant Reload of Replacement Switch