1 / 6

123.hp.com/oj8702 | HP Officejet 8702 Unboxing & Setting Up

Quick & Easy Step-by-Step Instructions for HP Officejet 8702 Printer Unboxing, First-Time Installation & Driver Download Guidance - https://ww123hp.com/oj8702/

Micheal1711
Download Presentation

123.hp.com/oj8702 | HP Officejet 8702 Unboxing & Setting Up

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HP Officejet 8702 First-Time Installation

  2. HP OJ8702 Printer Setup • When a printer is purchased, the first concern is to install or set up the device. You can refer the user manual to set up the printer and install the appropriate driver that supports the device. Setting up a printer is easy as a pie. Follow the step-by-step procedure and complete the setup:

  3. Quick Steps for First-Time Install • Slice the tape that is holding the box together and remove the 123 hp Officejet 8702 printer out of the package. • Check if all printer accessories are present in the package. Discard the packaging material that is found on the printer’s surface. • Open the exterior door, remove the tape and packaging present inside the printer. • Connect the power cord to the printer and the power board. • Press the Power button and turn on your printer.

  4. First, set up a USB connection and then you can change it to a wireless setup. • On your printer’s control panel, configure the device’s settings. You will be prompted to install the cartridges. • Unwrap a new cartridge and remove the pull tab and tape from it. • Open the cartridge access door and wait for the carriage to become idle. • Insert the cartridge into the printhead and make sure you have placed it in the correct slot. • Insert the other cartridge and close the cartridge door. • Load paper into the input tray and wait for the printer to calibrate.

  5. The ink will be charged, cartridges will be aligned and an alignment page will be printed. • For Driver Download, Install Visit Here: “https://ww123hp.com/oj8702/”

  6. Thank You!!!

More Related