1 / 26

Niels Bjørn Mortensen NBM@BIMCO.org

Reduction of Green House Gas Emissions from Ships . Niels Bjørn Mortensen NBM@BIMCO.org. Tripartite Meeting Tokyo 2007. Reduction of Green House Gas Emissions from Ships. Green House Gas (GHG) emissions will in presentation be limited to CO 2 .

MikeCarlo
Download Presentation

Niels Bjørn Mortensen NBM@BIMCO.org

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Reduction of Green House Gas Emissions from Ships Niels Bjørn Mortensen NBM@BIMCO.org Tripartite Meeting Tokyo 2007

  2. Reduction of Green House Gas Emissions from Ships • Green House Gas (GHG) emissions will in presentation be limited to CO2. • CO2 is produced whenever burning fossile fuels. • The amount of CO2 is depending on the specific fossile fuel. • In general one ton of fuel produces 3.0 – 3.2 ton of CO2

  3. Demand for reduced GHG Emissions? • Green House Gas (GHG) emissions from ships were not included in the Kyoto Protocol but left to the Maritime Industry at large to solve through IMO. • The Industry needs to be pro-active. • Otherwise – someone outside the business may tell us what to do! • Owners have room for improvement – but needs help from the entire maritime business. • Improvements in this context is higher efficiency as it means lower emissions in general! • An obvious way to reduce emissions in to reduce the speed of the ships, however, that may not be a sustainable solution.

  4. Reduction of Green House Gas Emissions from Ships • Technologies: Fuel Savings: • Waste Heat Recovering (WHR) 7-12% • Air Cavity System (ACS) 7-15% • Twin propeller 5-10% • Interceptor transom plate 3- 8% • Bulb and stem modifications 3- 7% • Stabiliser fin box modifications 3-10% • Rudder head box and design modifications 2- 5% • Shaft line modifications 2- 4% • New propeller blades 1- 4% • Additives 2- 5% • Total savings between: 30-57% • (If all measures are implemented and can work in harmony)

  5. Reduction of Green House Gas Emissions from Ships • This presentation will concentrate on two of the suggested measures: • Waste Heat Recovery • Air Cavity System

  6. Why waste heat recovery? • About 50% of the fuel input energy is not being put to productive use. • Recovering part of the wasted energy provides the vessel with: • lower fuel consumption • lower emissions

  7. Why waste heat recovery? Standard Engine with Heat Recovery Heat Balance RTA96C Engine ISO conditions, 100% load Total 54.9% Engine efficiency improvement with heat recovery = 54.9 / 49.3 = 11.4%

  8. Why waste heat recovery? • The application of a waste heat recovery system is threefold: • The operator profits from a lower annual fuel bill • The operator contributes to lower emissions, such as CO2, NOX and SOX • The operator benefits from being more competitive in the freight market

  9. How is wasted energy recovered? • Using exhaust gas energy to generate steam to operate a steam turbine. • Steam turbine drives a generator. • Generator feeds into the main switchboard.

  10. Shaft generator Fuel saving 7 - 12 % depending on sophistication of heat recovery plant

  11. Exhaust gas boiler

  12. Virtual Installation

  13. Virtual Installation

  14. Principal arrangement of power / steam turbogenerator package

  15. Shaft generator

  16. WHR – System Benefits

  17. Air Cavity System:

  18. Air Cavity System:

  19. Air Cavity System:

  20. Air Cavity System – Midship Section

  21. Air Cavity System: Additional Shell Plating Additional Floor Plating Area equivalent to basis vessel

  22. Case study: 115,000 DWT tanker modified for ACS Principal DimensionsConsumables Length over all 250.00 m Heavy fuel oil 2800 m3 Length between pp 240.00 m Marine diesel oil 185 m3 Breadth, moulded 44.20 m Lubricating oil 130 m3 Depth, moulded 21.70 m Fresh water 410 m3 Design draught 14.90 m Ballast water 44,200 m3 Speed, service, 15 % s.m. 15.0 kn Cargo capacity: Installed power: 15,230 BHP Cargo tanks 1 to 5, P+S 130,200m3 Fuel consumption: 1.56 t/h Slop tanks P+S 2,200 m3 Deadweight Displacement at design draught: 134,600 t Est. lightweight 18,900 t

  23. Case study: 115,000 DWT tanker modified for ACS

  24. Reduction of Green House Gas Emissions from Ships • Shipping needs to be pro-active in the endeavour • to limit GHG emissions. • Shipowners cannot do this alone. • We need the cooperation and innovative abilities • of ship-designers and shipyards. • We also need our charterers to accept ships • of novel designs and with novel features.

  25. Reduction of Green House Gas Emissions from Ships BIMCO would like to thank the following: • Siemens • Wärtsilä • Peter Brotherhood Ltd • Aalborg Boilers • DK Group

  26. Reduction of Green House Gas Emissions from Ships Thank you Questions?

More Related