1 / 1

ESP8266- 03 WIFI Transceiver Wireless Module

The ESP8266 is a brand new low-cost WiFi chip from Espressif which allows you to easily connect your project to the Internet of Things with a simple UART AT command interface.

Download Presentation

ESP8266- 03 WIFI Transceiver Wireless Module

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ESP8266- 03 WIFI Transceiver Wireless Module Product Details: On board indicator LEDs Wifi compatibility Standby current Size Power consumption Red for power, Blue for activity WiFi 802.11 b/g/n Less than 1mA 14.5 x 24.8mm Very low power consumption in power down mode (less than 10uA) The ESP8266 is a brand new low-cost WiFi chip from Espressif which allows you to easily connect your project to the Internet of Things with a simple UART AT command interface. This is the ESP8266 ESP-03 module with software version 0.90 which has an on-board ceramic antenna for improved wireless range and communicates at 115200 baud. The module breaks out all pins of the chip to a 2x7 SMD pin header with 0.2mm pitch. No external circuits are needed. The ESP8266 supports 802.11 b/g/n networks as Access Point, Station and both at the same time, it's firmware can be updated over a serial connection. Features:            For more details please visit the following link: https://www.cbo-it.de https://www.gbic-shop.de WiFi 802.11 b/g AP, STA, AP+STA modes Integrated TCP/IP stack Integrated RISC processor On-board indicator LEDs: red for power, blue for activity Very low power consumption in power down mode (<10uA) Standby current < 1mA Controlled via UART interface at 115200 baud with a simple set of AT commands Only 2 microcontroller pins needed for communication (RXD/TXD) Ships with firmware v0.90, firmware can upgraded any time by user Size: 14.5 x 24.8mm

More Related