1 / 1

Standard Light Kit

This is the standard (incandescent) Light Kit for 2009 and newer MTX carriers<br>Have a Look: - https://www.mototote.com/document-library.html<br>

Mototote
Download Presentation

Standard Light Kit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Instructions for: Light Kit (MTLK) for MTX Carriers In the box: Tools: • Check Left/Right markings on the back side of each light to designate left/right placement. • Attach Lights by putting the screws into the pre-punched holes on the MTX Platform Tube as shown here. Do not over-tighten or the light lens could crack. • Note Avoid removing screws completely from the lights because they are connected to wires inside. • Light kit assembly with 4 ea mounting screws 6 ea Black nylon cable ties You will need these tools: • Philips screwdriver • Scissors or fingernail clippers • • Run Cables toward the center of the carrier, then forward under the square tube toward the vehicle. • Secure Cables to the underside of the carrier with the nylon cable ties. • Clip Excess from ends of cable ties with scissors or fingernail clippers • Plug-in and Check Operation for brake, turn signal, and tail lights. Apply brakes and use turn signals with the headlights off. Repeat with the headlights on. Revised 12/18/2009 Page 1 of 1

More Related