1 / 29

Chemical Reaction Engineering Asynchronous Video Series

Chemical Reaction Engineering Asynchronous Video Series. Chapter 4, Part 2: 1. Applying the Algorithm to a Batch Reactor, CSTR, and PFR 2. Calculating the Equilibrium Conversion H. Scott Fogler, Ph.D. Using the Algorithm for Isothermal Reactor Design.

Rita
Download Presentation

Chemical Reaction Engineering Asynchronous Video Series

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chemical Reaction EngineeringAsynchronous Video Series Chapter 4, Part 2: 1. Applying the Algorithm to a Batch Reactor, CSTR, and PFR 2. Calculating the Equilibrium Conversion H. Scott Fogler, Ph.D.

  2. Using the Algorithm for Isothermal Reactor Design • Now we apply the algorithm to the reaction below occurring in a Batch Reactor, CSTR, and PFR. Gas Phase Elementary Reaction Additional Information only A fed P = 8.2 atm 0 3 T = 500 K C = 0.2 mol/dm 0 A0 3 3 k = 0.5 dm /mol-s v0 = 2.5 dm /s

  3. Isothermal Reactor Design Batch CSTR PFR Mole Balance:

  4. Isothermal Reactor Design Batch CSTR PFR Mole Balance: Rate Law:

  5. Flow Isothermal Reactor Design Batch CSTR PFR Mole Balance: Rate Law: Stoichiometry: Gas: V = V0 Gas: T =T0, P =P0 Gas: T = T0, P = P0 (e.g., constant volume steel container) Per Mole of A: Per Mole of A: Batch V=V0

  6. Flow Isothermal Reactor Design Batch CSTR PFR Mole Balance: Rate Law: Stoichiometry: Gas: V = V0 Gas: T =T0, P =P0 Gas: T = T0, P = P0 (e.g., constant volume steel container) Per Mole of A: Per Mole of A: Batch V=V0 V=V0

  7. Isothermal Reactor Design Batch CSTR PFR Stoichiometry (continued):

  8. Isothermal Reactor Design Batch CSTR PFR Stoichiometry (continued): Combine:

  9. Isothermal Reactor Design Batch CSTR PFR Stoichiometry (continued): Combine: Integrate:

  10. Isothermal Reactor Design Batch CSTR PFR Stoichiometry (continued): Combine: Integrate: Evaluate: Batch CSTR PFR For X=0.9:

  11. Example 1 Reversible Reaction, Constant Volume Determine Xe for a batch system with constant volume, V=V0 Reaction: Additional Information: CA0 = 0.2 mol/dm3KC = 100 dm3/mol

  12. Example 1 Reversible Reaction, Constant Volume Determine Xe for a batch system with constant volume, V=V0 Reaction: Additional Information: For constant volume: CA0 = 0.2 mol/dm3KC = 100 dm3/mol

  13. Example 1 Reversible Reaction, Constant Volume Determine Xe for a batch system with constant volume, V=V0 Reaction: Additional Information: For constant volume: Solving for the equilibrium conversion:   Xe = 0.83 CA0 = 0.2 mol/dm3KC = 100 dm3/mol

  14. Example 2 Reversible Reaction, Variable Volumetric Flow Rate Determine Xe for a PFR with no pressure drop, P=P0 Given: The system is gas phase and isothermal. Find: The reactor volume when X=0.8Xe Reaction: Additional Information: CA0 = 0.2 mol/dm3 k = 2 dm3/mol-min KC = 100 dm3/mol FA0 = 5 mol/min

  15. Example 2 Reversible Reaction, Variable Volumetric Flow Rate Determine Xe for a PFR with no pressure drop, P=P0 Given: The system is gas phase and isothermal. Find: The reactor volume when X=0.8Xe Reaction: Additional Information: First Calculate Xe: CA0 = 0.2 mol/dm3 k = 2 dm3/mol-min KC = 100 dm3/mol FA0 = 5 mol/min

  16. Example 2 Reversible Reaction, Variable Volumetric Flow Rate Determine Xe for a PFR with no pressure drop, P=P0 Given: The system is gas phase and isothermal. Find: The reactor volume when X=0.8Xe Reaction: Additional Information: First Calculate Xe: CA0 = 0.2 mol/dm3 k = 2 dm3/mol-min KC = 100 dm3/mol FA0 = 5 mol/min

  17. Example 2 Reversible Reaction, Variable Volumetric Flow Rate Determine Xe for a PFR with no pressure drop, P=P0 Given: The system is gas phase and isothermal. Find: The reactor volume when X=0.8Xe Reaction: Additional Information: First Calculate Xe: Solving for Xe: CA0 = 0.2 mol/dm3 k = 2 dm3/mol-min KC = 100 dm3/mol FA0 = 5 mol/min Xe = 0.89 (vs. Xe= 0.83 in Example 1) X = 0.8Xe = 0.711    

  18. Using Polymath Algorithm Steps Polymath Equations

  19. Using Polymath Algorithm Steps Polymath Equations Mole Balance d(X)/d(V) = -rA/FA0

  20. Using Polymath Algorithm Steps Polymath Equations Mole Balance d(X)/d(V) = -rA/FA0 Rate Law rA = -k*((CA**2)-(CB/KC))

  21. Using Polymath Algorithm Steps Polymath Equations Mole Balance d(X)/d(V) = -rA/FA0 Rate Law rA = -k*((CA**2)-(CB/KC)) Stoichiometry CA = (CA0*(1-X))/(1+eps*X) CB = (CA0*X)/(2*(1+eps*X))

  22. Using Polymath Algorithm Steps Polymath Equations Mole Balance d(X)/d(V) = -rA/FA0 Rate Law rA = -k*((CA**2)-(CB/KC)) Stoichiometry CA = (CA0*(1-X))/(1+eps*X) CB = (CA0*X)/(2*(1+eps*X)) Parameter Evaluation eps = -0.5 CA0 = 0.2 k = 2 FA0 = 5 KC = 100

  23. Using Polymath Algorithm Steps Polymath Equations Mole Balance d(X)/d(V) = -rA/FA0 Rate Law rA = -k*((CA**2)-(CB/KC)) Stoichiometry CA = (CA0*(1-X))/(1+eps*X) CB = (CA0*X)/(2*(1+eps*X)) Parameter Evaluation eps = -0.5 CA0 = 0.2 k = 2 FA0 = 5 KC = 100 Initial and Final Values X0 = 0 V0 = 0 Vf = 500

  24. General Guidelines for California Problems

  25. General Guidelines for California Problems Every state has an examination engineers must pass to become a registered professional engineer.  In the past there have typically been six problems in a three hour segment of the California Professional Engineers Exam. Consequently one should be able to work each problem in 30 minutes or less. Many of these problems involve an intermediate calculation to determine the final answer.

  26. General Guidelines for California Problems Every state has an examination engineers must pass to become a registered professional engineer.  In the past there have typically been six problems in a three hour segment of the California Professional Engineers Exam. Consequently one should be able to work each problem in 30 minutes or less. Many of these problems involve an intermediate calculation to determine the final answer. Some Hints: • Group unknown parameters/values on the same side of the equation example: [unknowns] = [knowns]

  27. General Guidelines for California Problems Every state has an examination engineers must pass to become a registered professional engineer.  In the past there have typically been six problems in a three hour segment of the California Professional Engineers Exam. Consequently one should be able to work each problem in 30 minutes or less. Many of these problems involve an intermediate calculation to determine the final answer. Some Hints: • Group unknown parameters/values on the same side of the equation example: [unknowns] = [knowns] • Look for a Case 1 and a Case 2 (usually two data points) to make intermediate calculations

  28. General Guidelines for California Problems Every state has an examination engineers must pass to become a registered professional engineer.  In the past there have typically been six problems in a three hour segment of the California Professional Engineers Exam. Consequently one should be able to work each problem in 30 minutes or less. Many of these problems involve an intermediate calculation to determine the final answer. Some Hints: • Group unknown parameters/values on the same side of the equation example: [unknowns] = [knowns] • Look for a Case 1 and a Case 2 (usually two data points) to make intermediate calculations • Take ratios of Case 1 and Case 2 to cancel as many unknowns as possible

  29. General Guidelines for California Problems Every state has an examination engineers must pass to become a registered professional engineer.  In the past there have typically been six problems in a three hour segment of the California Professional Engineers Exam. Consequently one should be able to work each problem in 30 minutes or less. Many of these problems involve an intermediate calculation to determine the final answer. Some Hints: • Group unknown parameters/values on the same side of the equation example: [unknowns] = [knowns] • Look for a Case 1 and a Case 2 (usually two data points) to make intermediate calculations • Take ratios of Case 1 and Case 2 to cancel as many unknowns as possible • Carry all symbols to the end of the manipulation before evaluating, UNLESS THEY ARE ZERO

More Related