1 / 9

What Size Connector For Bidet Hose

Conor Bidets are becoming popular for a cleaner and more comfortable bathroom experience. Theyu2019re a great alternative to regular toilet paper, leaving you feeling fresh. But, when it comes to setting up or maintaining bidets, a common question pops up: What size connector should I use for my bidet hose?

Ritika32
Download Presentation

What Size Connector For Bidet Hose

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. What Size Connector For Bidet Hose? conors.com.au

  2. About Us Conor Bidets are becoming popular for a cleaner and more comfortable bathroom experience. They’re a great alternative to regular toilet paper, leaving you feeling fresh. But, when it comes to setting up or maintaining bidets, a common question pops up: What size connector should I use for my bidet hose? conors.com.au

  3. Common What size Connector For Bidet Hose Don’t worry, solving this plumbing puzzle is easy. The most common size for bidet hose connectors is 1/2 inch NPT (National Pipe Thread). This standard size works with most bidet models and toilet water supply lines. If you’re not sure about your hose connector size, just check the manufacturer’s instructions or take the old connector to your local hardware store for help. conors.com.au

  4. 1/2 inch NPT Most commonly used for bidets Here's a quick guide to bidet hose connector sizes: 3/8 inch NPT Less common, but still works with some bidet models 7/8 inch Typically used for the toilet water supply line conors.com.au

  5. Steps for Putting new bidet connector When putting in a new bidet hose connector, it’s important to make sure it fits snugly and doesn’t leak. Follow these steps: conors.com.au

  6. Turn off the water supply Find the shut-off valve for your toilet’s water supply line and turn it clockwise until the water stops. Remove the old connector Use a wrench or pliers to carefully loosen the old connector from both the bidet hose and the toilet water supply line. Clean the connections Wipe down the connection points on both the bidet hose and the water supply line to get rid of any dirt or debris. conors.com.au

  7. Attach the new connector Wrap plumber’s tape around the threads of the new connector for a tight seal. Screw the connector onto the bidet hose first, then hand-tighten it onto the water supply line. Secure it tightly Use a wrench to gently tighten the connector on the water supply line until it’s snug but not too tight. Turn on the water supply Slowly open the shut-off valve and check for leaks. If there are any leaks, tighten the connector a bit more. conors.com.au

  8. Conclusion In Conclusion, putting in or changing a bidet hose connector is not as hard as it sounds. Just use the usual 1/2 inch NPT size for most bidets, and your setup should go well. If you’re unsure, check the manual or ask for help at the hardware store. conors.com.au

  9. Thankyou conors.com.au

More Related