1 / 5

Embedded system design and services- Industrial automation devices- Smartembeddedsystems.com- Hart Modem- HART devices S

Smart Embedded Systems, Inc., based in Silicon Valley USA, is the first one in the world to offer SOFT HART™; patented and designed with a single microcontroller. HART is an industry standard protocol used in industrial automation. We also offer our services to customize the solution needed for HART devices and controllers. http://www.smartembeddedsystems.com/about.html

SmartEmbedded
Download Presentation

Embedded system design and services- Industrial automation devices- Smartembeddedsystems.com- Hart Modem- HART devices S

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hart Modem

  2. http://www.smartembeddedsystems.com SES offers HART Soft Modem running multiple instances in a single patented microprocessor. There is a need to run multiple HART modems on the Input/Output(I/O) concentrator side where an I/O controller communicates with multiple HART sensor nodes and collects and consolidates information for further processing upstream in the communication channel. The current state of the art solution uses multiple chips each doing the function of a single modem. 

  3. http://www.smartembeddedsystems.com Benefits of our Solution: There is a considerable cost and power savings in consolidating multiple modems in one integrated circuit. Furthermore, this offers higher reliability due to a fewer component count. Our solution provides an efficient use of system resources such as sine tables, filter coefficients, demodulator functions, low pass filter functions and DMA

  4. http://www.smartembeddedsystems.com By running the multiple instances of the modem in a single thread this can minimize process overhead such as interrupt service routines context save and restore so that the CPU utilization is optimized. This can result in lower CPU speed and lower power consumption. This also provides room to run more instances with a given CPU speed. Furthermore, the communication from the I/O controller host CPU to the modems can be consolidated over a single communication channel since now multiplier soft modems are running in one microprocessor. This communication can be over either normal UART or SPI, I2C.

  5. http://www.smartembeddedsystems.com Address 43134 Osgood Rd. Fremont, CA 94539 Email baldev@smartembeddedsystems.com Phone 510-304-6830 Fax 510-687-9300

More Related