1 / 2

Installing A Bunsen Air Heat Pump

The Solamics Bunsen Air installation guide offers step by step instructions for how to install and set up the Bunsen Air Solar Assisted Heat Pump. The guide includes essential information as well as helpful tips to make the process easier. It was created for ease of use and is therefore simple to understand.

Solamics
Download Presentation

Installing A Bunsen Air Heat Pump

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Installing A Bunsen Air Heat Pump The Solamics Bunsen Air installation guide offers step by step instructions for how to install and set up the Bunsen Air­ Solar Assisted Heat Pump. The guide includes essential information as well as helpful tips to make the process easier. It was created for ease of use and is therefore simple to understand.  To make installation and set up more straight forward, there are a sequence of   videos   available,   which   demonstrate   all   aspects   of   operation   and

  2. installation processes for the Bunsen system. Feedback from installers alsoinstallation processes for the Bunsen system. Feedback from installers also helps to improve the installation guide and include more troubleshooting options. If you come across any problems that the guide does not cover ­ then reach out to us, our technical team are always on hand to assist. Advice for installing the Bunsen Air heat pump It is the responsibility of both the customer and installer to ensure that the property on which the installation will occur, has been properly surveyed to determine the feasibility of a Bunsen Air unit’s use in that location.  For peak performance, the thermodynamic panels that come as part of the Bunsen Air system, will need to be installed where they have good exposure to the natural elements.  The Bunsen Air unit should also be installed as close as possible to the hot water cylinder ­ ideally no further than 5 metres distance. The panels which are mounted externally are connected to the Bunsen unit by specialist refrigeration pipes. Therefore, consideration to the installation of this pipe work must be given. The Bunsen unit has a range of fully automatic functions which are all explained in the installation guide and in online videos. Things to consider when connecting a heat pump Things to consider are; The location of the Bunsen air controller in relation to the hot water cylinder • The most suitable location and the preferred layout for the external thermodynamic panels • Age and efficiency of the water cylinder should also be evaluated, as this is often a good opportunity to upgrade to a modern cylinder to avoid any unnecessary heat loss. •

More Related