1 / 7

Plasma Cutting Tool & its Different Forms

If you want to know about plasma cutting tool, then read this document to know about the plasma cutting tool & its different forms to use in different mechanical machine. If you want to buy plasma cutting tool like roller guide, circle cutting guide and more, then visit online store of Tanjant Tool Co. Pty. Ltd today.

TanjantTool
Download Presentation

Plasma Cutting Tool & its Different Forms

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TANJANT TOOL CO. PTY. LTD Plasma cutting tool & it's different forms

  2. plasma cutting is a procedure that uses a high speed of ionized gas that is conveyed from a choking hole. The high speed ionized gas, that is, the plasma conducts power from the light of the plasma shaper to the work piece. PLASMA CUTTING

  3. PLASMA CUTTING ADVANTAGES OF convenience higher quality cuts quick speeds

  4. DIFFERENT FORMS OF PLASMA CUTTER ROLLER GUIDES: Roller Guide is used for cutting in the corners or for cutting an arc. In this type, some operators prefer an extended tip. This tip enables the operator to direct the flow of plasma jet in a better way.

  5. In case that you don't have steady consider utilizing circle cutting guide. These guides hold the light in position so it keeps up predictable standoff height, keep the tip up from contacting the work piece and make it simpler to go in a straight line or CIRCLE CUTTING GUIDE cut an ideal circle. For simple inclining,  circle guide  freely changing wheel height to set the slope edge.

  6. BEVELLED CUT For expelling old or flawed welds, utilize a gouging tip. The gap on a gouging tip is three to multiple times more extensive than a normal tip. Its cone shape pushes out the plasma circular segment, which evacuates significantly more material than the choked hole of the standard tip.

  7. BUY NOW https://www.tanjant.com/

More Related