1 / 4

The Evil AB Weld (submodel) 0.5 inch welds (fillet = .3505” throat)

The Evil AB Weld (submodel) 0.5 inch welds (fillet = .3505” throat). 6-21-07. Use 0.5” full weld where possible, fillet (.35 equivalent used elsewhere). Easy full depth weld (similar to other coils). Transition zone. Fillet welds 1. Transition zone. Fillet welds 2.

addison-morse
Download Presentation

The Evil AB Weld (submodel) 0.5 inch welds (fillet = .3505” throat)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Evil AB Weld (submodel)0.5 inch welds (fillet = .3505” throat) 6-21-07

  2. Use 0.5” full weld where possible, fillet (.35 equivalent used elsewhere) Easy full depth weld (similar to other coils) Transition zone Fillet welds 1 Transition zone Fillet welds 2 Weld is shown in neon green

  3. Fillet welds 1 have more room to grow if needed Next slide

  4. Fillet welds 2 are already tough and there is little room to grow Obviously, we could chamfer and produce a weld as a combo of a reseeded weld and the fillet near the edges and the transition zones but that would be VERY hard to model and transfer to FEA as I would need blending, curves, etc. Extended shim

More Related