1 / 19

METO 621

METO 621. Lesson 10. Upper half-range intensity. For the upper half-range intensity we use the integrating factor e - t/m. In this case we are dealing with upgoing beams and we integrate from the bottom to the top. Upper half-range intensity. Upper half-range intensity.

adelaide-richter
Download Presentation

METO 621

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. METO 621 Lesson 10

  2. Upper half-range intensity • For the upper half-range intensitywe use the integrating factor e-t/m • In this case we are dealing with upgoing beams and we integrate from the bottom to the top.

  3. Upper half-range intensity

  4. Upper half-range intensity • To find the intensity at an interior point t, integrate from t* to t and obtain • What happens when m approaches zero. This is where the line of sight traverses an infinite distance parallel to the slab. Here

  5. Formal solution including Scattering and Emission • Note that the source is now due to thermal emission and multiple scattering • The independent variable is the extinction optical depth, the sum of the absorption and scattering optical depths. We can write

  6. Formal solution including scattering and emission • The method of using an integrating factor can be applied as before • In slab geometry the solutions become

  7. Formal solution including scattering and emission • where • and

  8. Radiative Heating Rate • The differential change of energy over the distance ds along a beam is • If we divide this expression by dsdA, (the unit volume, dV), and also dndt then we get the time rate of change in radiative energy per unit volume per unit frequency, due to a change in intensity for beams within the solid angle dw.

  9. Radiative Heating Rate • Since there is (generally) incoming radiation from all directions, the total change in energy per unit frequency per unit time per unit volume is • The spectral heating rate His

  10. Radiative Heating Rate • The net radiative heating rate H is • In a slab geometry the radiative heating rate is written

  11. Separation into diffuse and direct(Solar) components • Two distinctly different components of the shortwave radiation field. The solar component: • We have two sources to consider, the Sun and the rest of the medium

  12. Diffuse and direct components • Assume (1) the lower surface is black, (2) no thermal radiation from the surface, the we can write the half range intensities as

  13. Diffuse and direct components • And for the +ve direction

  14. Diffuse and direct components • Now substitute the sum of the direct and diffuse components

  15. Diffuse and direct components

  16. Diffuse and direct components • where • One can repeat this procedure for the upward component

  17. Diffuse and direct components

  18. Diffuse and direct components

  19. Diffuse and direct components • If we combine the half-range intensities we get • Where u is cosq and not |cosq|

More Related