1 / 19

METO 621

METO 621. Lesson 12. Prototype problems in Radiative Transfer Theory.

thuyet
Download Presentation

METO 621

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. METO 621 Lesson 12

  2. Prototype problems in Radiative Transfer Theory • We will now study a number of standard radiative transfer problems. Each problem assumes a slab geometry and an optically uniform (homogeneous) medium. The radiation is monochromatic and unpolarized. Complete specification of each problem requires five input variables • (1) t*, the vertical optical depth • (2) S*(t,W) , the internal or external source function

  3. Prototype problems in Radiative Transfer Theory • (3) p(W’,W) - the phase function • (4) a – the single scattering albedo • (5) r(-W’,W) – the bidirectional reflectance function of the surface • For a Lambert surface pLis a constant • For * then S()et0

  4. Prototype problems • The analytic or numerical solutions provide the following output variables • (1) The reflectance • (2) The transmittance • (3) The absorptance • (4) The emittance • (5) The source function • (6) The internal intensity field • (7) The heating rate and net flux

  5. Prototype problems

  6. Problem #1 – Uniform Illumination • The incident field is taken to be constant in the downward direction • The radiation field depends only on t and m • The source function depends only on t • The frequency integrated version of the problem reduces to a simple greenhouse problem • It approximately reproduces the effect of an optically thick cloud overlying an atmosphere

  7. Problem #1 – Uniform Illumination • The source for the diffuse emission is

  8. Problem #2 Constant Imbedded Source • For thermal radiation problems the term is the driver of the scattered radiation. This is an imbedded source. In general this term is a strong function of frequency and temperature. We will assume that the term is constant with depth.

  9. Problem #3 – Diffuse Reflection Problem • In this problem we consider collimated incidence and a lower boundary that may be partly reflecting. For shortwave applications the term (1-a)B can be ignored. The only term is:

  10. Prototype problems

  11. Boundary Conditions: Reflecting and Emitting surface • First consider a Lambertian surface (BDRF = μL) which also emits thermal radiation with an emittance ε and temperature Ts. • The upward intensity at the surface is given by :

  12. Boundary Conditions: Reflecting and Emitting surface • The upper and lower boundary conditions for the three prototype problems are: • Prototype problem 1

  13. Boundary Conditions: Reflecting and Emitting surface

  14. Reciprocity, Duality and Inhomogeneous Media • The Reciprocity Principle states that, in any linear system, the pathways leading from a cause at one point to an effect at another point can equally be traversed in the opposite direction. Hence for the BRDF and flux reflectance:

  15. Transmittance • Assume a homogeneous horizontal slab.

  16. Transmittance • Reciprocity relations also exist for the transmittance. Previous discussions have been limited to homogeneous atmospheres. However, in general, the reflectance and transmission illuminated from above, are different from those illuminated from below.

  17. Surface Reflection

  18. Surface Reflection • Consider the effect of a reflecting lower boundary. • The is continuously being ‘reflected’ by the surface and the slab itself. Hence we end up with an infinite series of beams that add up to get

  19. Surface Reflection • A similar equation can be derived for the transmittance

More Related