1 / 28

The Institution of Engineers, Malaysia

The Institution of Engineers, Malaysia. THE PROFESSIONAL INTERVIEW QUESTIONS.

afia
Download Presentation

The Institution of Engineers, Malaysia

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Institution of Engineers, Malaysia

  2. THE PROFESSIONAL INTERVIEW QUESTIONS

  3. The main purpose of these questions is to manifest professionalism of a candidate. A candidate should have gained some understanding of the Professional Code of Ethics and conduct before entering for the Professional Interview. The questions selected by the Examiners may be expected to be familiar. IEM-COE-PI

  4. A candidate would be expected to demonstrate:- • That he has thought sufficiently about the role of the engineer in the society vis-à-vis his professional Code of Ethics. • That he can write in clear and concise manner that is intelligible to laymen. Candidate would be expected to answer only 1 question out of 2 selected by the Examiners from among the 15 questions listed below:- IEM-COE-PI

  5. 1. Discuss the dilemma engineers face in balancing capital expenditure versus optimum design for efficient operations and maintenance, bearing in mind the impact of capital expenditure on the engineer’s fees. IEM-COE-PI

  6. Technological and economic efficiencies in providing service to the public are the expected benefits from the privatisation of public utilities companies in Malaysia. Discuss with examples whether the technological benefits of privatisation have been achieved. IEM-COE-PI

  7. Are the present safety practices of your industry adequate? What steps do you consider should be taken by the industry to address the present situation? IEM-COE-PI

  8. The manifestation of professionalism among engineers occurs through their interactions with other segments of the society, which can be viewed essentially as an exercise in group dynamics. In this regard, the Institution of Engineers, Malaysia (IEM) is ideally constituted to serve this purpose. Discuss the various functions that can be provided by IEM in promoting professionalism. IEM-COE-PI

  9. In this technological age, the power of the engineers in shaping the society and environment is all pervading and can profoundly affect the lives of many members of the society. Enumerate, from your personal experience, how largely positive impacts have accrued from the contributions of engineers. IEM-COE-PI

  10. “He shall not under any circumstances solicit advisory or consultative work, either directly or by an agent, nor shall he pay, by commission or otherwise any person who may introduce clients to him”. Discuss the ways in which an engineer, especially one that is a newcomer to the field, can project him/herself as a responsible professional to the society without being guilty of violating the above. IEM-COE-PI

  11. As an engineer responsible for the development of a new project, your first task according to the planning schedule is to clear the land and prepare the site for construction. To do so, you will need to clear vast stretches of land that will undoubtedly cause land erosion and subsequently contaminating of streams and rivers around the site. You are under tremendous pressure to finish the task as the job is already behind schedule. Given the constraints that you have with regards to deadline, limited technical solutions and the preservation of the environment, discuss the ethical considerations, which confront you under the circumstances. IEM-COE-PI

  12. Engineers are often entrusted with the responsibility of implementing large-scale projects involving millions of dollars. In view of the large amount of money changing hands, the integrity and ethical standards of engineers are being put to test. What measures can an engineer take to prevent corruption and unethical practice of cutting corners in order to safeguard the good image of the engineering profession? IEM-COE-PI

  13. In recent years, there is stronger awareness by the public at large for better quality works in a construction project. How can a professional engineer ensure better quality construction without conflicting with the profit objectives of both the owner and the contractor? IEM-COE-PI

  14. ‘Conflict of professional interest frequently arises in the working environment of an engineer’. Discuss the statement and propose the appropriate solutions for overcoming the problems. IEM-COE-PI

  15. Recent years have seen increased national and international Protocols and Regulations and national Acts and Legislation on the control of many forms of pollution. Discuss the needs and consequences of observing these regulations with special reference to the particular industry you are involved in. IEM-COE-PI

  16. “In today’s dynamic marketplace, many organisations/industries are initiating cost reduction measures to remain competitive”. Discuss the contradictory demand of cost reduction programmes and the need to invest to enhance the standards of Health, Safety and Environment (HSE) in the industry. Is it possible to be cost-effective yet meeting the ever-increasing HSE requirements? IEM-COE-PI

  17. Engineers are increasingly playing a significant role in the nation’s fast pace development. Please suggest how engineers can make greater contributions with awareness in safety, health and environment and how engineers can keep abreast with the development of technology without confining to one’s specific roles or disciplines. IEM-COE-PI

  18. In a turnkey project, the turnkey contractor requested you as a consultant to put up irregular (i.e. non-conforming to current engineering practice) proposals to maximise profits from the project. Discuss the key points that you must address so as not to compromise on your professional ethics. IEM-COE-PI

  19. With the rapid development in IT, would virtual Laboratories be a good substitute for real ones in engineering? Elaborate on the merits and demerits of the issue. IEM-COE-PI

  20. BOARD OF ENGINEERS MALAYSIAPROFESSIONAL ASSESSMENT EXAMINATIONQUESTIONS ON CODE OF PROFESSIONAL CONDUCT These questions are applicable to Section B of the Essay. Candidates would be expected to answer only ONE question out of two which would be selected by the examiners from among the 8 questions listed below: BEM-COPC-PAE

  21. 1. The engineer has a duty of care to the public under common law. Discuss, giving examples, the obligations that his duty imposes on himself as a Professional Engineer. BEM-COPC-PAE

  22. If you were a consulting engineer and was submitting Turnkey tender on behalf of a Turnkey Contractor, would you consider a conflict of interest between the role of a consulting engineer and contractor. Enlarge on the ethics of this subject. BEM-COPC-PAE

  23. Identify the areas in which conflict between the Resident Engineer’s staff and contractor’s staff can develop and give your views as to whether good relationship can be achiever without infringing on the code of ethics. Illustrate your answer from your own experience. BEM-COPC-PAE

  24. It is clear to you that an Engineer engaged in a particular project (implement at the tax payer’s account) is not maintaining professional standards, i.e professional competence and integrity are lacking.What would be your reaction? Would you report the above incident to the Board of Engineers, Malaysia or bring this to the attention of the client or will you maintain silence and which standard work being completed? BEM-COPC-PAE

  25. Every Engineer shall at all times so order his conduct to uphold the dignity and reputation of his profession and to safeguard the public interest in matters of safety and herein and others. He shall exercise his professional skill and the judgement to the best of his abilities in discharging his professional responsibilities. He shall also act with firmness and integrity towards all persons with whom his work is connected. Discuss your responsibilities and obligations in the event that, due to building operations under charge, adjacent buildings have been damaged beyond repairs. BEM-COPC-PAE

  26. “Professional Engineer should be allowed to practice as consultants and as contractor at the same time”. Do you agree with the statement? If so, give your reasons objectively for supporting it. If not also give reasons for appeasing it. BEM-COPC-PAE

  27. Under normal circumstances, a consulting engineer should not supplant the work of another consulting engineer after knowing that the 1st consulting engineer has already been entrusted with the work.If he has been asked by the same client to take over the work of that 1st consulting engineer, what do you think should be the proper procedure in effecting the charge of consultants”. How should the matter be dealt with if the 1st engineer refuses to agree to this change because he has not been paid his fees by the client? BEM-COPC-PAE

  28. A consulting Engineer has submitted structural design plans to the local authority for a certain building. The client terminates his services after the plans have been approved by the local authority. You are then engaged to take over his work and complete the project including supervision of construction. What are your professional responsibilities and those of the previous engineer who has submitted the plans? If you have to make changes to the structural drawings, what do you think should be the proper procedure in dealing with this matter and also how you assign professional liability? BEM-COPC-PAE

More Related