1 / 5

OP Tools - Applications (1)

OP Tools - Applications (1). 2 new timing users, new dynamic destination Power converters – settings (for base optics): Parameters, optics, beam process in LSA Cycles in LSA Power converter critical settings FEI → into FEI application Logging Stephane, Delphine, Jorg, Georges-Henry

ahmed-vang
Download Presentation

OP Tools - Applications (1)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OP Tools - Applications (1) • 2 new timing users, new dynamic destination • Power converters – settings (for base optics): • Parameters, optics, beam process in LSA • Cycles in LSA • Power converter critical settings FEI → into FEI application • Logging • Stephane, Delphine, Jorg, Georges-Henry • Interlocks like between CNGS/TI 8 • Update of West Extraction BIS monitoring application • Logging • Jorg, Georges-Henry (check with Bruno) • BLMs • Update of TL BLM application • Critical settings of BLMs • Logging • Fabio, Verena

  2. BLMs.. ← TT66 from here TT60 and TI 2 until here → TT66 BLMs as part of the TI 2 up application

  3. OP Tools - Applications (2) • BPMs • YASP...done • Logging...done • Jorg, Georges-Henry • BCTs • BCT application update...done • Special fixed display/application: count number of shots (needs to be resetable), intensity per shot, integrated intensity • Logging...done • Markus, Georges-Henry • Automatic emittance measurement in the SPS • Investigate continuous acquisition of wirescanner and writing result to SDDS • Guy • Alarms • Ventilation and temperature of dump • ? • BTVs • BTV application, Logging • Screen matching (for different optics, work with files) • Fabio, Georges-Henry

  4. OP Tools – Applications (3) • Special “request a shot” • Almost like LHC injection sequencer, but not with mastership • Predefine extraction schemes for HiRadMat (number of batches will vary) • No “start“ mode, only “step” mode • Delphine • Configure beam size at focal point • New GUI needed: • Choose beam size: look up beam size for requested focal point vs. Quadrupole k -> trim • Show current setting: look up quadrupole k vs beam size at different focal points • Fabio, Verena

  5. Logging Only BPMs defined so far…need to also link TT60 BPMs there.

More Related