S.P. Kozlova General Director LLC “ Zavod “KP”

1. S.P. Kozlova General Director LLC“Zavod“KP” Manufacture of engineering productswith specified properties fromstructural materials for shipbuilding

2. Advantages of using UHMWPE (ultrahigh molecular weight polyethylene) Methods of UHMWPE processing at KP Works • High impact resistance and notched impact resistance • High tensile breaking strength and resistance to tensile failures • Excellent long-term characteristics • Good sliding characteristics, caking prevention • Very low abrasiveness • High strength even at low temperatures • Can be used even at very low temperatures • Good resistance to stress cracking • No water absorption • Contact with food products is permitted • Vey good electric and dielectric properties • Good processability • Hot pressing (compression sintering) • RAM extrusion. Bars, pipes, rods are produced by the extrusion method. The solid-drawn pipes obtained are used as pulp guiding pipes in loading/unloading of coal, cement, concrete, mortars. As no algae, crustaceans stick to these pipes, they are highly resistant in seawater, and one can hope for their widely use by oil field and gas field workers in the development of Northern territories and coastal shelf. • Sputtering (flame sputtering, electrostatic sputtering). The coating obtained is characterized by high impact strengthand bending elasticity.

3. Interactionwith Krylov State Research Centre (SRC), a federal state unitary enterprise In 2009-2011, Zavod“KP”has collaborated with Krylov SRC under the order of Ministry of industry and trade of Russia within the framework of the Federal target-oriented program for Development of the defence and industry complex of the Russian Federation for 2007-2010 and during the period till 2015: “Establishment of an experimental section for the organization of production of plastic products for hydraulic piping systems, elements of air cleaning systems, de-icing systems and coatings and other products from plastics”. The St. Petersburg Governor G.S. Poltavchenkoat the “Polymer cluster” exhibition stand during the conduction of the Russian Industrialist International Exhibition

4. Properties of UHMWPE-based polymer coatings • Extremely high impact strength of a notched test piece • High operability at increased working speeds • Vey high sliding qualities • Very low wear; resistance to sticking • Insignificant friction losses • Very high resistance to the action of chemicals (acids, alkali, aggressive gases) • High resistance to cracking • Vey good noise suppression • Broad spectrum of applications due to temperature stability within the range from –200°Cto +90°C Development of polymer coatings for the internal surface of freight wagonsfor the protection of goods from freezing down: R&D project withJoint institute of mechanical engineering of the Belarus National Academy of Sciences for design improvement of thermal spraying apparatuses Testing of the UHMWPE-based polymer coating for reduction of goods freezing-down to the gondola wagon wallshas been performed manually on 3 gondola wagons of different year of manufacture.

5. Implementation of the project of “Dwarf colour light signal”from polymer structural materials inSt. Petersburg Prototyping Centre Т R А N S F Е R Designingof the colour light signal with the housing, foundation, box, etc.from polymer structuralmaterialsdeveloped jointly with the Academy of Sciences of the Republic of Belarus. Two-colourcasting. ZEMAX CODE V

6. Thank youfor your attention! Tel.: (812) 542-15-21Fax: (812) 542-71-48 Internet: http://www.kp-plant.ru/