1 / 2

Mike Duco’s layer structure for A1 / A2 fit-up.

Mike Duco’s layer structure for A1 / A2 fit-up. Leica measured points of all the points that they could see. Faro measured points of all the points that they could see. All data taken with a ½” tooling ball.

ailani
Download Presentation

Mike Duco’s layer structure for A1 / A2 fit-up.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mike Duco’s layer structure for A1 / A2 fit-up.

  2. Leica measured points of all the points that they could see Faro measured points of all the points that they could see All data taken with a ½” tooling ball The Faro was set up looking at the NBI side and the Leica was positioned at the inboard nose sitting on a concrete block. FINAL position for A1 on top of A2 Art’s supplied faducial point data Leica locked in to A2 coil A flange Used all the pts locked in from the Leica to bring the Faro into this regime Leica locked in to A2 coil A flange and then took global wall pts Three target points on B flange of A1

More Related