500 likes | 708 Views
LINTON UNIVERSITY COLLEGE SCHOOL OF CIVIL ENGINEERING. GEO-MECHANICS (CE2204). Weathering and Erosion. Lecture Week No 10 Nur Syazwani binti Noor Rodi. Introduction.
E N D
LINTON UNIVERSITY COLLEGE SCHOOL OF CIVIL ENGINEERING GEO-MECHANICS(CE2204) Weathering and Erosion Lecture Week No 10 NurSyazwanibinti Noor Rodi
Introduction Weathering - the destructive processes by which materials at or near the Earth's surface are changed in color, texture, composition, firmness or form, with little or no transportation of the altered material. Erosion - the mechanical or chemical destruction of the land and removal of material by moving water, ice or wind.
Rock Weathering Weathering of rocks can be classified into: • Physical weathering – disintegration of rock into smaller pieces without any change in mineralogy • Chemical weathering – decomposition of rock minerals into new minerals and solutions
Physical Weathering • Produces finer particles by fracturing rock • The forces involved must be strong enough to exceed the compressional, tensional or shear strength of the rock • 6 main processes: • Impact & Abrasion • Ice Wedging • Salt-Crystal Growth • Exfoliation • Thermal Expansion • Root Wedging.
Impact & Abrasion • Abrasion occurs when two rocks rub together or impact each other • It occurs in many environments. Among these are: • Glacial environments • Deserts • Mountainous areas • Rivers • Beaches
Impact & Abrasion Boulders rounded by impacts and abrasion
Ice Wedging – Frost Action • As water freezes it expands (increases in volume up to 9%); the repeated growth and melting of ice in pore space or fractures can force the fracture to grow • The initial size of the fracture is not important - over time the fracture will expand as the freeze/thaw cycle continues • Eventually the rock is shattered due the forces generated during crystallisation and result in the formation of a talus slope, or talus cone.
Ice Wedging – Frost Action Talus slope Talus cone
Salt-Crystal Growth • Similar to ice wedging, both result from forces created during crystallization • Ice wedging is most prevalent in areas which experience cyclic freezing and thawing whereas salt-crystal growth is most common in arid environment. • Three minerals are involved in this process: Halite (salt), Calcite, Gypsum. • As water evaporates, minerals are left behind to grow between grains in the rock. • Can result in cavities or alcoves forming in vertical faces.
Salt-Crystal Growth Evaporite deposits on flank of Rock
Salt-Crystal Growth Alcove at base of rock
Salt-Crystal Growth Surface pattern on this pedestal rock caused by salt crystallisation
Salt-Crystal Growth Evaporite of salt deposits on Sandstone
Exfoliation - Unloading • Rocks which form under the surface is under pressure – subjected to confining pressure • When the pressure is released, the rock will expand • Pressure is released as the rock is brought to the surface - tectonics, isostasy, erosion • As it expands the outer layers break free in sheets - exfoliation.
Exfoliation - Unloading A batholith forms at great depth – uplift and erosion expose it – release of pressure causes cracks parallel to surface
Exfoliation - Unloading Exfoliation sheet at the outer layers of a rock mass
Exfoliation - Unloading Exfoliation sheet at the outer layers of a rock mass
Exfoliation - Unloading Exfoliation slab at the outer layers of a rock mass
Exfoliation - Unloading Exfoliation slab at the outer layers of a rock mass
Thermal Expansion • Rock has a low thermal conductivity, when rock is heated on a surface that heat does not travel inward very rapidly • The heated exterior of the rock will expand more rapidly than the cool interior, causing the exterior to fracture - spalling
Thermal Expansion Spalling on the surface of a rock mass
Root Wedging • Root wedging occurs when a plant, especially trees, sink root systems into existing joints and fractures • As the root grows it forces the fracture to expand • Relatively minor weathering force in rocks, but is very important for soil development.
Root Wedging Root wedging of an exfoliation slab
Root Wedging Root wedging of an exfoliation slab
Chemical Weathering Mechanical weathering produces smaller particles. This allows chemical weathering to progress much faster by increasing the surface area available for chemical reactions……..
Chemical Weathering • The process of weathering by which chemical reactions transform rocks and minerals into new chemical combinations that are stable under prevailing conditions at or near the Earth's surface • 5 main processes: • Hydrolysis • Hydration • Oxidation • Solution/Dissolution • Ion Exchange
Hydrolysis • Hydrolysis is a decomposition reaction involving water and a silicate mineral • H+ ions or OH- ions are taken in by a mineral, altering the mineral's chemistry • Not only does the chemistry change - the crystal structure changes - this can weaken the rock structure
Hydration • Hydration is also a reaction involving water and a silicate mineral • H2O is taken in by certain minerals • Hydration will also add water to a clay mineral which will cause the mineral to expand • Grus1 is formed when this reaction takes place in granite 1 Grus is an accumulation of angular, coarse-grained fragments (sand and gravel) resulting from the granular disintegration of crystalline rocks Grus sand, when cemented into a sandstone, will form an arkose
Oxidation • Oxidation occurs when an element combines with an oxygen ion, O-2 • The most commonly observed is the oxidation of Fe+2 (iron)combines with O-2 (oxygen) to form Fe2O3 (iron oxide) • This process is better known as 'rusting'. • Many rocks have a reddish colour due to the presence of hematite
Oxidation A freshly broken rock shows chemical weathering (mostly oxidation) progressing inward
Solution/Dissolution • This process involves the transformation of minerals containing Ca, Mg, K, Na, and Fe into carbonate minerals (calcite) by reactions with CO2 (carbon dioxide) and H2O (water) • Both CO2 and H2O are readily available in the atmosphere, surface water, and groundwater • Carbonic acid is a weak acid but over long periods of time can dissolve large quantities of calcite/limestone/marble
Solution/Dissolution The solution effects by the sea on the limestone at the base of the pillar
Ion Exchange • Ion exchange is the substitution of ions in solution for ions in minerals • Water contains ions of H+, OH-, Ca+, Na+, K+, Cl- • Most minerals have the capability to exchange ions - most common in the clay minerals which attract ions • Which ions are exchanged will depend on the chemistry and environment
Weathering of Coastline The occurrence of various rock types & weathering actions create different coastal features e.g. (1) cliff, (2)cove, (3)sea-cave, (4)sea arch, (5) stack
Deep weathering profile in tropical climate (Dengkil, Selangor)
Deep weathering profile in tropical climate (Dengkil, Selangor)
Joints lead to disintegration of rock into smaller blocks; they also act as channels for agents of chemical weathering to penetrate deep into the rock body.
Disintegration of rock without any chemical change on its mineral composition due to physical weathering
Disintegration of rock without any chemical change on its mineral composition – physical weathering.
Oxidising environments can be recognized by their reddish-brown colour. Oxygen-poor environments can be recognized because they are green-grey
0 1 2 3 A N Y W H E R E 0 1 0 3 1 1 E L 3 1 1 1 0 0 1 1 25m high. Signs of instability. Some wedge failure have occurred. Schmidt Hammer 1 1 9 3 3 2 LIMESTONE 2 3 3 5 0 0 0 0 0 1 5 3 5 2 - 3 Base of slope 2 0 1 3 0 2 0 2 5 1 - 2 Berm level 9 0 3 2 0 3 0 9 5 5 - 7 Centre line of slope