1 / 2

Earthing Solution: The right technique to install Chemical Earthing Rods

Chemical earthing is a very much proven method to achieve consistent and permanent earthing solutions. For more details: https://www.atharvaasia.com/post/earthing-solution-the-right-technique-to-install-chemical-earthing-rods or Contact on: 919850043753

akshayap07
Download Presentation

Earthing Solution: The right technique to install Chemical Earthing Rods

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Earthing Solution: The right technique to install Chemical Earthing Rods Need of Chemical Earthing: In a conventional earthing generally salt and coal is placed around the earthing plate but unfortunately it has a lot of drawbacks like we do not have proper control over the proportion of ingredients mixed and it's not even much reliable. And that's why chemical earthing came into the picture and it has completely taken over the old conventional earthing method. Installation method for ACTROD Chemical Earthing system Make the ACTROD Earthing System ready for Installation, then follow below procedure for Chemical earthing, 1. Drill / Bore a hole of 6 / 5 Inches in diameter to a suitable depth as per Electrode Length.(If electrode is 10 feet drill 10 feet, 6 inch ) 2. Put handfuls of SOILTREAT backfill compound initially, which is conductivity improvement material, and has to be put into the drilled hole. 3. Place the ACTROD that is a chemical earthing rod at the centre of the Drilled hole. 4. Refill space around the electrode with 10 kgs SOILTREAT backfill compound, pour around 10 litres of water to allow trapped air to escape. 5. In this manner gradually continue the refilling process till the electrode is buried. 6. Cover the electrode with compound tightly,so that it stands firmly in the pit. https://www.atharvaasia.com/chemical-earthing-rods-electrodes

  2. 7. Pour a few buckets of water around the pit. 8. Give around 1 week to the system to set in the soil. 9. Then check ohmic value and connect with equipment with the help of a connecting strip. 10. After the whole completion of the process, place chamber cover on the top to protect the earthing system. Note: Earthing can be extended more than 10 feet and can be installed with the help of couplers (tight all accessories with help of spanners). Safety Precautions been incorporated while performing Chemical Earthing: 1. Do not drop the earthing electrode in the pit. 2. Do not use force to drive the electrode into the pit. 3. Do not hammer or cut the electrode while installation. 4. After installation pour a few buckets of water in and around the pit for around 10 days. This helps the system to set. 5. Ensure that the full Length of Electrode Buried in SOILTREAT backfill Compound at all times. Chemical earthing is a very much proven method to achieve consistent and permanent earthing solutions. [Read More] Contact Us Atharva Infrastructures Setu, Plot No.69, Bharat Kunj Colony No.2, PWD society, Erandwane, Kothrud, Pune - 411038 Maharashtra, India. Call on: +919850043753, +918380074022 https://www.atharvaasia.com https://www.atharvaasia.com/chemical-earthing-rods-electrodes

More Related