1 / 14

INTRODUCING

INTRODUCING. PLANOMETRICS. PLANOMETRICS. WHAT IS IT ?. SEE SOME EXAMPLES. HOW DO YOU DO IT ?. PLANOMETRICS. WHAT IS IT ?. Technical Drawing – rarely sketching. Mainly used for room interiors. Can also be architectural. Generally start with a plan - rotated.

alpha
Download Presentation

INTRODUCING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. INTRODUCING PLANOMETRICS

  2. PLANOMETRICS WHAT IS IT ? SEE SOME EXAMPLES HOW DO YOU DO IT ?

  3. PLANOMETRICS WHAT IS IT ? Technical Drawing – rarely sketching Mainly used for room interiors Can also be architectural Generally start with a plan - rotated Angle of rotation 45o/45oor 30o/60oor 60o/30o

  4. PLANOMETRICS SEE SOME EXAMPLES

  5. PLANOMETRICS ANOTHER EXAMPLE

  6. PLANOMETRICS AND ANOTHER EXAMPLE

  7. PLANOMETRICS HOW DO YOU DO IT ? Planometric views are mainly used to show building interiors (rooms) to give a pictorial impression of how the room looks. However, Planometric views can be drawn for any object. For rooms drawn in Planometric, always start with the floor area, this can be shown rotated to an angle of 30o/60o or 45o/45o as shown. 45o 60o 30o 45o

  8. PLANOMETRICS DRAW IN THE FLOOR AREA Very faintly, draw in the footprint of the furniture on the floor plan. 60o 30o

  9. PLANOMETRICS CREATE THE BASE UNITS Project vertical lines upwards from each corner of the units. Then draw in the tops of the units. 60o 30o

  10. PLANOMETRICS NOW DRAW THE WALLS Project vertical heights from the corners of the room. 60o 30o

  11. PLANOMETRICS NOW ‘LINE IN’ THE ROOM Finally ‘line in’ the correct lines taking care to only draw over the edges that can be seen. 60o 30o

  12. PLANOMETRICS SUMMARY Start with initial angles of 30o\60o or 45o\45o for the floor area Draw in lightly the footprint of the furniture or units Project vertical lines upward from the corners to the height of the units Project vertical height of the walls from the corners of the room Line in the edges that can be seen

  13. back to menu PLANOMETRICS FINISHED

More Related