1 / 37

SOLUTIONS

SOLUTIONS. A solution is a homogeneous mixture of a solute dissolved in a solvent. The solubility of a solute in a given amount of solvent is dependent on the temperature, the pressure, and the chemical natures of the solute and solvent. (3.1oo).

alta
Download Presentation

SOLUTIONS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SOLUTIONS

  2. A solution is a homogeneous mixture of a solute dissolved in a solvent. The solubility of a solute in a given amount of solvent is dependent on the temperature, the pressure, and the chemical natures of the solute and solvent. (3.1oo) Dissolved particles are too small to be trapped by a filter

  3. Regents Question: 08/02 #7 Which mixture can be separated by using the equipment shown? (1) NaCl(aq) and SiO2(s) (2) NaCl(aq) and C6H12O6(aq) (3) CO2(aq) and NaCl(aq) (4) CO2(aq) and C6H12O6(aq) þ (aq) stands for aqueous which means dissolved in water. Dissolved particles are too small to be trapped by the filter.

  4. Solubility of a nonvolatile solute depends on temperature. • Solubility is the maximum amount of solute that a solvent can hold at a given temperature. • An unsaturated solution is one in which the solvent can dissolve more solute • A saturated solution is one in which the solvent has as much solute as it can hold • A supersaturated solution is one in which there is more solute dissolved than a solvent can normally hold. • Make a supersaturated solution by cooling a saturated solution • Supersaturated solutions are unstable and will precipitate the excess solute when a seed crystal is added. • As temperature increases, solubility of a solid increases.

  5. Table G shows the solubilities of some gases and some solids at various temperatures when dissolved in 100 grams of water.

  6. A solution which is on the line is saturated • A solution below the line is unsaturated • A solution above the line is supersaturated

  7. Add a test crystal to see if a solution is unsaturated, saturated or supersaturated. • Unsaturated – the test crystal dissolves • Saturated – the test crystal settles to the bottom • Supersaturated – a large amount of crystals precipitate from the solution

  8. Regents Question: 06/02 #40 According to Reference Table G, which solution is saturated at 30°C? (1) 12 grams of KClO3 in 100 grams of water (2) 12 grams of KClO3 in 200 grams of water (3) 30 grams of NaCl in 100 grams of water (4) 30 grams of NaCl in 200 grams of water þ

  9. The solubility of a gas depends on temperature and pressure. • As temperature increases, the solubility of a gas decreases • As pressure increases, the solubility of a gas increases

  10. Which are gases?

  11. Regents Question: 08/02 #48 One hundred grams of water is saturated with NH4Cl at 50°C. According to Table G, if the temperature is lowered to 10°C, what is the total amount of NH4Cl that will precipitate? (1) 5.0 g (3) 30. g (2) 17 g (4) 50. g þ

  12. Regents Question: 01/03 #65-66 When cola, a type of soda pop, is manufactured, CO2 (g) is dissolved in it. A capped bottle of cola contains CO2 (g) under high pressure. When the cap is removed, how does pressure affect the solubility of the dissolved CO2 (g)? A glass of cold cola is left to stand 5 minutes at room temperature. How does temperature affect the solubility of the CO2 (g)? As the pressure decreases, the solubility decreases. As the temperature increases, the solubility decreases.

  13. Oil and water are not miscible • Like dissolves like (charged solutes dissolve in charged solvents, uncharged solutes dissolve in uncharged solvents) • Nonpolar solutes dissolve in nonpolar solvents • Polar solutes dissolve in polar solvents • Ionic solutes dissolve in polar solvents (Nonpolar) (Polar) Dry cleaners use a nonpolar solvent to get rid of oil and grease Liquids that dissolve each other are called miscible liquids.

  14. Regents Question: 06/03 #42 Hexane (C 6 H 14 ) and water do not form a solution. Which statement explains this phenomenon? (1) Hexane is polar and water is nonpolar. (2) Hexane is ionic and water is polar. (3) Hexane is nonpolar and water is polar. (4) Hexane is nonpolar and water is ionic. þ

  15. Solubility Guidelines • Not all substances are soluble in water • Reference Table F lists solubility rules and exceptions to those rules.

  16. Soluble Not Soluble

  17. Regents Question: 08/02 #40 Which of the following compounds is least soluble in water? (1) copper (II) chloride (2) aluminum acetate (3) iron (III) hydroxide (4) potassium sulfate þ

  18. Regents Question: 06/03 #14 • According to Table F, which of these salts is least soluble in water? • LiCl • (2) RbCl • (3) FeCl2 • (4) PbCl2 þ

  19. The concentration of a solution may be expressed as molarity (M), percent by volume, percent by mass, or parts per million (ppm). (3.1pp)

  20. Moles Molarity = Liters Regents Question: 06/02 #42 What is the molarity of a solution that contains 0.50 mole of NaOH in 0.50 liter of solution? (1) 1.0 M (3) 0.25 M (2) 2.0 M (4) 0.50 M þ

  21. Regents Question: 08/02 #36 How many moles of solute are contained in 200 milliliters of a 1 M solution? (1) 1 (3) 0.8 (2) 0.2 (4) 200 þ

  22. Molarity = moles liters Na 1 x 23.0 = 23.0 I 1 x 126.9 = 126.9 149.9 g / mole 0.010M = x 1.0 L Regents Question: 08/02 #49 What is the total number of grams of NaI(s) needed to make 1.0 liter of a 0.010 M solution? (1) 0.015 (3) 1.5 (2) 0.15 (4) 15 þ X = 0.010 moles 0.010 moles x 149.9 g/mole =

  23. Regents Question: 01/03 #40 Solubility data for four different salts in water at 60°C are shown in the table below. Which salt is most soluble at 60°C? (1) A (2) B (3) C (4) D Salt Solubility in Water at 60 °C A - 10 grams /50 grams H2O B - 20 grams /60 grams H2O C - 30 grams /120 grams H2O D - 40 grams/80 grams H2O þ

  24. Regents Question: 01/04 #56-58 A student uses 200 grams of water at a temperature of 60°C to prepare a saturated solution of potassium chloride, KCl. Identify the solute in this solution. According to Reference Table G, how many grams of KCl must be used to create this saturated solution? This solution is cooled to 10°C and the excess KCl precipitates (settles out). The resulting solution is saturated at 10°C. How many grams of KCl precipitated out of the original solution? KCl 90 g Hint: 200 g of water was used – table G is for 100 g of water 30 g

  25. The addition of a nonvolatile solute to a solvent causes the boiling point of the solvent to increase and the freezing point of the solvent to decrease. The greater the concentration of particles, the greater the effect. (3.1qq)

  26. Regents Question: 06/03 #23 At standard pressure when NaCl is added to water, the solution will have a (1) higher freezing point and a lower boiling point than water (2) higher freezing point and a higher boiling point than water (3) lower freezing point and a higher boiling point than water (4) lower freezing point and a lower boiling point than water þ

  27. Regents Question: 01/04 #13 Compared to pure water, an aqueous solution of calcium chloride has a (1) higher boiling point and higher freezing point (2) higher boiling point and lower freezing point (3) lower boiling point and higher freezing point (4) lower boiling point and lower freezing point þ

  28. Table H – the vapor pressure of four liquids at various temperatures. As temp inc, vapor pressure inc.

  29. Regents Question: 06/03 #40 • According to Reference Table H, what is the vapor pressure of propanone at 45°C? • 22 kPa • 33 kPa • 70. kPa • (4) 98 kPa þ

  30. A liquid will boil when its vapor pressure equals the atmospheric pressure. • Raising the temperature will increase the vapor pressure of the liquid • Lowering the atmospheric pressure will lower the boiling point • On top of a high mountain, water boils at a temperature below 100C

  31. Standard pressure is 101.3 kilopascals (kPa) or 1 atmoshpere (atm) The normal boiling point occurs when the atmospheric pressure is 101.3 kPa (standard pressure) The normal boiling point of ethanol is 80ºC.

  32. Regents Question: 08/02 #28 As the pressure on the surface of a liquid decreases, the temperature at which the liquid will boil (1) decreases (2) increases (3) remains the same þ

  33. Regents Question: 08/02 #30 As the temperature of a liquid increases, its vapor pressure (1) decreases (2) increases (3) remains the same þ

  34. Regents Question: 08/02 #44 The vapor pressure of a liquid is 0.92 atm at 60°C. The normal boiling point of the liquid could be (1) 35°C (3) 55°C (2) 45°C (4) 65°C þ The normal boiling point is the temperature at which a liquid boils when the atmospheric pressure is standard pressure (1 atm or 101.3 kPa)

  35. Regents Question: 01/03 #68 What is the vapor pressure of liquid A at 70°C? Your answer must include correct units. 700 mm Hg

  36. Regents Question: 01/03 #69 At what temperature does liquid B have the same vapor pressure as liquid A at 70°C? Your answer must include correct units. 113°C

  37. Regents Question: 01/03 #70 Which liquid will evaporate more rapidly? Explain your answer in terms of intermolecular forces. Liquid A will evaporate more rapidly because, at any temperature, it has the higher vapor pressure.

More Related