1 / 36

Diode with an RLC Load

Diode with an RLC Load. v L (t). v C (t). V Co. Close the switch at t = 0. V Co. KVL around the loop. Characteristic Equation. 3 Cases. Case 1  = ω 0 “critically damped” s 1 = s 2 = - roots are equal i(t) = (A 1 + A 2 t)e s1t. 3 Cases (continued). Case 2

alton
Download Presentation

Diode with an RLC Load

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Diode with an RLC Load vL(t) vC(t) VCo

  2. Close the switch at t = 0 VCo

  3. KVL around the loop

  4. Characteristic Equation

  5. 3 Cases • Case 1 •  = ω0 “critically damped” • s1 = s2 = - • roots are equal • i(t) = (A1 + A2t)es1t

  6. 3 Cases (continued) • Case 2 •  > ω0 “overdamped” • roots are real and distinct • i(t) = A1es2t + A2es2t

  7. 3 Cases (continued) • Case 3 •  < ω0 “underdamped” • s1,2 = - +/- jωr • ωr = the “ringing” frequency, or the damped resonant frequency • ωr = √ωo2 – α2 • i(t) = e-t(A1cosωrt + A2sinωrt) • exponentially damped sinusoid

  8. Example 2.6

  9. Determine an expression for the current

  10. Determine an expression for the current

  11. Determine the conduction time of the diode • The conduction time will occur when the current goes through zero.

  12. Conduction Time

  13. Freewheeling Diodes Freewheeling Diode

  14. Freewheeling Diodes • D2 is reverse biased when the switch is closed • When the switch opens, current in the inductor continues. D2 becomes forward biased, “discharging” the inductor.

  15. Analyzing the circuit • Consider 2 “Modes” of operation. • Mode 1 is when the switch is closed. • Mode 2 is when the switch is opened.

  16. Circuit in Mode 1 i1(t)

  17. Mode 1 (continued)

  18. Circuit in Mode 2 I1 i2

  19. Mode 2 (continued)

  20. Example 2.7

  21. Inductor Current

  22. Recovery of Trapped EnergyReturn Stored Energy to the Source

  23. Add a second winding and a diode “Feedback” winding The inductor and feedback winding look like a transformer

  24. Equivalent Circuit Lm = Magnetizing Inductance v2/v1 = N2/N1 = i1/i2

  25. Refer Secondary to Primary Side

  26. Operational Mode 1Switch closed @ t = 0 Diode D1 is reverse biased, ai2 = 0

  27. Vs = vD/a – Vs/a vD = Vs(1+a) = reverse diode voltage primary current i1 = is Vs = Lm(di1/dt) i1(t) = (Vs/Lm)t for 0<=t<=t1

  28. Operational Mode 2Begins @ t = t1 when switch is opened i1(t = t1) = (Vs/Lm)t1 = initial current I0 Lm(di1/dt) + Vs/a = 0 i1(t) = -(Vs/aLm)t + I0 for 0 <= t <= t2

  29. Find the conduction time t2 Solve -(Vs/aLm)t2 + I0 = 0 yields t2 = (aLmI0)/Vs I0 = (Vst1)/Lm t1 = (LmI0)Vs t2 = at1

  30. Waveform Summary

  31. Example 2.8 • Lm = 250μH N1 = 10 N2 = 100 VS= 220V • There is no initial current. • Switch is closed for a time t1 = 50μs, then opened. • Leakage inductances and resistances of the transformer = 0.

  32. Determine the reverse voltage of D1 • The turns ratio is a = N2/N1 = 100/10 = 10 • vD = VS(1+a) = (220V)(1+10) = 2420 Volts

  33. Calculate the peak value of the primary and secondary currents • From above, I0 = (Vs/Lm)t1 • I0 = (220V/250μH)(50μs) = 44 Amperes • I’0 =I0/a = 44A/10 = 4.4 Amperes

  34. Determine the conduction time of the diode • t2 = (aLmI0)/Vs • t2 = (10)(250μH)(44A)/220V • t2 = 500μs • or, t2 = at1 • t2 = (10)(50μs) • t2 = 500μs

  35. Determine the energy supplied by the Source W = (1/2)((220V)2/(250μH))(50μs)2 W = 0.242J = 242mJ W = 0.5LmI02 = (0.5)(250x10-6)(44A)2 W = 0.242J = 242mJ

More Related