Lecture: 4 WDM Networks Design & Operation

1. Lecture: 4 WDM Networks Design & Operation Ajmal Muhammad, Robert Forchheimer Information Coding Group ISY Department

2. Outline • Key Terminology in WDM Optical Network • Different Core Network Topologies • Designing Network Nodes • Categorizations of WDM Networks • Wavelength-routed and broadcast-and-select • Static and dynamic • Routing and Wavelength Assignment (RWA) • Static, dynamic • Grooming

3. OpticalcoreNetworks

4. Key Terminology in WDM Optical Networks Optical node/cross-connect/switch/router Optical node has a number of input (output) fibers, each carrying one or more incoming (outgoing) optical signals The purpose of which is to direct each incoming optical signal to an appropriate outgoing fiber End nodes: all possible sources or destinations of data Physical topology: graph showing the major physical components (i.e., fibers, nodes) of the network

5. Key Terminology…. Lightpath: optical connection from one end node to another, used to carry data in the form of encoded optical signals Logical/Virtual topology: graph whose nodes indicate the end nodes and edges as lightpaths From E1 to E3 From E2 to E4 From E1 to E2 From E3 to E4 From E4 to E1 Physical topology of WDM network with four end nodes E1,..,E4, and four optical routers R1,..,R4 Lightpaths on physical topology

6. Logical/Virtual Topology From E1 to E3 From E2 to E4 From E1 to E2 From E3 to E4 From E4 to E1 Corresponding logical topology Lightpaths on physical topology

7. Topologies for core Networks National scientific foundation (NSF) network Optical cross-connect

8. Topologies for core Networks 14 nodes, 21 bidirectional links European optical network topology German network topology

9. Designing Network NodeExample 4 input and output fibers 32 wavelengths on each fiber Design the node such that • 4 signals can be dropped/added • Wavelengths are added/dropped through tunable transponders 14 nodes, 21 bidirectional links

10. Designing Network Node 4 Nos. of 1x32 DMUX 4 Nos. of 32x1 MUX 32 Nos. of 8x8 optical switch 1 144x144 optical switch 16 Nos. of transponder 14 nodes, 21 bidirectional links

11. Constructing a Large Switch from Smaller Switches 4 wavelength channels in fiber Optical add-drop multiplexer (OADM)constructed from MUX, DEMUX, a 6x6 optical switch, and 2 tunable transponders How to construct an OADM with the same functionality by using 4x4 switches ?

12. First Method Constructing an OADM using 4x4 switches 4 wavelength channels in fiber

13. Second Method Constructing an OADM using 4x4 switches 4 wavelength channels in fiber

14. Categorizations of WDM Networks Wavelength-routed and Broadcast-and-select networks • Wavelength-routed – optical signal is sent along a specified path and not broadcast to all nodes in the network • Broadcast-and-select – source end node selects an appropriate wavelength and broadcasts the data to be transmitted to all end nodes in the network Static and Dynamic lightpath allocation • Static – once the lightpaths are set-up between the ordered pairs of the end nodes, they will continue to exist for a relatively long period of time (months or years) • Dynamic – set-up on demand and, when the communication is over, the corresponding lightpath is taken down (i.e., no longer remain operational)

15. Categorizations of WDM…. Single-hop and Multi-hop WDM networks • Single-hop– all data communication involves a path length of one logical edge, i.e., one lightpath is involved in each communication Single-hop networks are also called all-optical networks • Multi-hop – some data communication involves more than one lightpath Multi-hop network Single-hop network

16. Static Routing and Wavelength Assignment (RWA) Assumption: The amount of traffic for each source-destination pair is in wavelength units Traffic Model: Set of lightpaths to be established in the network is known in advance Constraint: Any two lightpaths sharing the same physical link are assigned different wavelengths Objective: Establish a set of lightpaths in such away to minimize the number of wavelengths used in the network Application: Static RWA problem arises naturally in the design and capacity planning of an optical network

17. Static RWA Decompose into two sub-problems Routing • Fixed routing • Alternate routing • Adaptive routing Wavelength assignment (WA) • Random WA • First-fit • Least-used/SPREAD • Most-used/PACK

18. WA :: Graph Coloring Problem Problem can be reduced to graph coloring • Construct a graph G where nodes represents lightpaths, an edgeexists between two nodes if the corresponding lightpaths pass through a common physical link • Color the nodes in G such that no two adjacent nodes have the same color 2 3 1 4 6 5 Network with eight routed-lightpaths Auxiliary graph for the lightpaths in the network

19. Static RWA :: a Layered Graph Approach • Route and assign wavelength to each connection one by one • Use layered graph to deal with wavelength continuity constraint • Create W copies of the network graph, W = number of wavelengths in a fiber • RWA is solved by finding a path in one copy of the network graph • Limited/fixed conversion: add links between layers

20. Static RWA with Wavelength Conversion If each node has full wavelength conversion capability • Only need solve routing problem • Minimizing the maximum flow will minimize the number of wavelengths used

21. Dynamic RWA Traffic Model: Service requests arrive to and depart from the network dynamically in a random manner Constraint: Any two lightpaths sharing the same physical link are assigned different wavelengths Objective: Route and assign wavelengths in such a way as to minimize the blocking probability of the network Application: Dynamic RWA problem is encountered during the real-time network operational performance of the optical networks

22. Dynamic RWA :: Assumptions Each service request or call needs onewavelength units of transmission rate Service requests arrivals for source-destination pair form a Poissonprocess Source-destination pairs are uniformly distributed among all network nodes Each service request has the holding-time that is exponentially distributed Blocked calls are lost from the network; there is no reattempt

23. RWA :: In General

24. Sub-wavelength Traffic:: Traffic Grooming So far we assume that each source-destination (s-d) pair has its traffic demand equal to an integer multiple of wavelength unit What if the traffic of an s-d equal to 0.3 wavelength unit ? In this scenario, a single lightpath may carry multiple traffic streams from different s-d pairs Traffic grooming multiplexing several traffic streams onto a common lightpath Necessary for efficient wavelength channel usages

25. Traffic Grooming Strategies Aim: Minimize electronic costs by reducing the number of add-drop multiplexers (ADMs)and make efficient use of wavelengths • Each ADM can multiplexseveral lower rate streams to form a higher rate stream ORdemultiplex a higher rate stream to several lower rate ones • Employs O-E-O conversion • Works at a particularwavelength • ADM works on a single wavelength, if there are W wavelengths, every node would need N*W ADMs

26. Example Network Topology a) Physical Network b) Traffic on the Network t1 0 1 0 1 t5 t6 fiber t2 t4 3 2 3 2 t3

27. Traffic Grooming Approach1 (Random) Total number of ADMs needed = 8

28. Traffic Grooming Approach 2 Total number of ADMs needed = 7