1 / 17

DES 606 : Watershed Modeling with HEC-HMS

DES 606 : Watershed Modeling with HEC-HMS. Module 10: Average Rainfall Theodore G. Cleveland, Ph.D., P.E, M. ASCE, F. EWRI 26-28 August 2015. Module 10. Outline for Module 10. FHWA-NHI-02-001 Highway Hydrology Chapter 2, Section 2.1; Chapter 3

amadeline
Download Presentation

DES 606 : Watershed Modeling with HEC-HMS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DES 606 : Watershed Modeling with HEC-HMS Module 10: Average Rainfall Theodore G. Cleveland, Ph.D., P.E, M. ASCE, F. EWRI 26-28 August 2015 Module 10

  2. Outline for Module 10 • FHWA-NHI-02-001 Highway Hydrology • Chapter 2, Section 2.1; Chapter 3 • Examine spatial distribution of rainfall and averaging techniques. • Examine how to put multiple gages into HMS and assign these gage depths to a particular watershed. Module 10

  3. Total and Incremental Rainfall • The total amount (measured as depth) of rainfall that occurs in a storm is the important input characteristic for describing the response of a watershed to rainfall. • The depth-time of rainfall (hyetograph) is equally important. Module 10

  4. Rainfall Properties • There are a number of time-related and space-related factors that are used in explaining rainfall input. • The four most important are: • Intensity (a rate: i.e. inches/hour) • Duration (a time: 15 minutes) • Frequency (a probability: 1%) • Average Depth (a length: inches) • Actually better thought of as volume/area, but dimensionally it is a length. Module 10

  5. HEC-HMS Rainfall Input • HEC-HMS has precipitation input at “gages” that are assigned to basins. • The examples so far assume a single gage is assigned to a sub-basin. • HEC-HMS inputs are in depths, either incremental or cumulative • Intensity x Duration = Depth • These computations are typically external to HMS. • Here duration is simply used as a time interval, but the term really refers to an entire storm length and not some portion. Module 10

  6. Average Rainfall • Precipitation • Meterology, Climate • Runoff • Fraction of precipitation signal remaining after losses Spatial distribution – these precipitation arrows may not be identical. Unless we wish to route hydrographs, need some way to “average” the input. • Watershed • Losses • Transformation • Storage • Routing Module 10

  7. Average Rainfall • Averaging is used to generate uniform inputs for unit hydrograph applications • One implicit assumption of the UH is spatially uniform input time series. • Averaging avoids having to route hydrographs • Routing would probably be required on larger watersheds. • If the data justify distribution, then could route subdivided watersheds to capture storm patterns. Module 10

  8. Average Rainfall • The entire volume of rainfall applied to an entire basin is called the precipitation volume • If the basin area normalizes this volume the resulting value is called the equivalent uniform depth • Methods to compute equivalent depth • arithmetic mean • theissen polygon network • iso-heyetal method Module 10

  9. Arithmetic Mean • The mean value of all nearby gages is used • Not all gages actually on the watershed Module 10

  10. Polygon Weighting • A weighted mean based on polygon area is used • Not all gages actually on the watershed • Polygons formed using Theissen method • Can use a minimum distance algorithm to semi-automatically generate the weights Module 10

  11. Polygon Weighting • A weighted mean based on polygon area is used Subarea A Subarea B Subarea C Subarea D Area ratios are called Theissen weights Subarea E Module 10

  12. Isohyetal • A weighted mean based on iso-hyetal panel areas is used • Not all gages actually on the watershed • Areas formed by intersection of isohyetal contours and underlying drainage area Module 10

  13. Isohyetal • A weighted mean based on isohyetal panel areas is used Module 10

  14. Averaging Rainfall • Theissen polygons and arithmetic mean are probably the most common because the weights are constants with respect to geography. • Arithmetic mean is easiest to automate Module 10

  15. Example • Illustrate use of multiple gages on Ash Creek. • Known Theissen weights are • 0.12 and 0.88 • Simulate using these known weights. Module 10

  16. Summary • Multiple rain gage data can be used to estimate an equivalent uniform depth • Gage weights by a variety of methods • Arithmetic mean • Minimum distance (Theissen polygons) • Isoheyetal • Inverse distance methods Module 10

  17. Summary • HEC-HMS models multiple gages in the Meterological Model Manager • The example illustrates how to set-up multiple gages • Weights were supplied Module 10

More Related