1 / 16

FINITE ELEMENT ANALYSIS OF HUMAN FEMUR

FINITE ELEMENT ANALYSIS OF HUMAN FEMUR. H. A. K HAWAJA (PhD Student, Dept. of Engineering) A. N AIK (PhD Student, Dept. of Material Sciences) K. P ARVEZ (Professor; Research Centre for Modelling & Simulation). 4 TH I NT. C ONFERENCE OF M ULTIPHYICS, L ILLE , F RANCE, 9-11 D EC 09.

amaris
Download Presentation

FINITE ELEMENT ANALYSIS OF HUMAN FEMUR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FINITE ELEMENT ANALYSIS OF HUMAN FEMUR H. A.KHAWAJA (PhD Student, Dept. of Engineering) A. NAIK (PhD Student, Dept. of Material Sciences) K.PARVEZ (Professor; Research Centre for Modelling & Simulation) 4TH INT. CONFERENCEOF MULTIPHYICS, LILLE, FRANCE, 9-11DEC 09

  2. 2 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 POINTSFOR DISCUSSION • INTRODUCTION • FEMUR CAD DEVELOPMENT • Laser 3-D Scanning • CAD Model • Marrow Cavity (Approx.) • FINITE ELEMENT ANALYSIS • Finite Element Modelling • Material Properties and Assumptions • Loading and Boundary Conditions • Finite Element Analysis Results • SUMMARY & CONCLUSION • REFERNCES • ACKNOWLEDGEMENTS

  3. 3 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 INTRODUCTION • Largest Human Bone • Single Support Member • Less Flexible (Stiff) • Anisotropic Material FEMUR • This work addresses: • Load Bearing limit of Femur • Natural Safety Factor • Results will aid in deciding substitute material for bone

  4. 4 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FEMUR CAD DEVELOPMENT • Laser 3-D Scanning: COORDINATES CLOUD OBJECT LASER SCAN ROTATION

  5. 5 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FEMUR CAD DEVELOPMENT • CAD Model: • Marrow Cavity is developed based on approximation

  6. 6 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FINITE ELEMENT MODELLING • Finite Element Mesh: • Tetrahedral 20-noded 186 structural solid element has been used • Mesh sensitivity analysis is carried out to ensure the quality of results • Mesh has been refined in the regions of high Gradients

  7. 7 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FINITE ELEMENT MODELLING • Material Properties & Assumptions: • Originally Bone material is anisotropic but assumed to be isotropic because complete femur was taken for analysis; a piece of bone could be solved for anisotropic solution but not the complete bone. • The bone Young’s modulus varies between 10 to 20 GPa. The Poisson’s ratio is about 0.3 *. “For linear static analysis stresses doesn’t depend on modulus of elasticity” • Physiological conditions has been ignored for time being; e.g. muscle stresses. y x z *BAOHUA, J., HUAJIN, GAO., (2004). Journal of Mechanics and Physics of Solids, 52, 1963-1990.

  8. 8 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FINITE ELEMENT MODELLING • Loading & Boundary Conditions: • Axial Load • Bending Load • Based on its position w.r.t. Its orientation • Load is varied until failure

  9. 9 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FINITE ELEMENT MODELLING • Finite Element Results (Compression): • Displacement Contour Plot 1 Units = 1 metres

  10. 10 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FINITE ELEMENT MODELLING • Finite Element Results (Compression): • Von-Mises Stress Contour Plot 1 Units = 1 Pascal Max. Stress regions coincides under axial and bending load

  11. 11 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FLUIDIZED BED FINITE ELEMENT MODELLING • Finite Element Results (Based on 70 Kg Human Weight): • 69 Kg is limit load under bending load and 414 Kg is limit load under axial load. • *Failure limit is 100 MPa(BAOHUA, J., HUAJIN, GAO., (2004). Journal of Mechanics and Physics of Solids, 52, 1963-1990.)

  12. 12 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 SUMMARY & CONCLUSION • Summary: • 3-D CAD Model has been developed via Laser Scanning • Approximations have been applied on material and model • Finite Element Analysis has been conducted • Results are evaluated • Conclusion: • Natural Margin of Safety under 35 Kg Design Load (70Kg average Human) of compression is 9.74. • Natural Margin of Safety under 35 Kg Design Load (70Kg average Human) of bending is 0.952. • Human Femur is designed to bear 10 times more load compared to load at normal conditions. It has also been found out Femur resistance to fracture under compression is approx. 5 times to the bending.

  13. 13 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 FUTURE WORK • Evaluated results are the indicative of the mechanical properties of substitute material for bones. • Physiological conditions may be involved to increase the accuracy of results. • Whole human bone structure may be solved via FEM under the availability of computational resources.

  14. 14 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 REFERENCES

  15. 15 H. A.KHAWAJAMULTIPHYSICS 2009, LILLE, FRANCE, 9-11 DEC 09 ACKNOWLEDGEMENTS • Institute of Space Technology (IST) – Pakistan • Cambridge Commonwealth Trust – Cambridge, UK • Research Centre for Modelling & Simulation, National University of Sciences & Technology (NUST) - Pakistan

  16. THANK YOU CONTACT HASSAN KHAWAJA Email: hak23@cam.ac.uk Webpage: http://hassanabbaskhawaja.blogspot.com

More Related