1 / 20

GOT1000 Series SoftGOT-GOT Link Function for GT15 and GT16 series

GOT1000 Series SoftGOT-GOT Link Function for GT15 and GT16 series. SoftGOT-GOT Link function – Remote Maintenance for GOTs!. The SoftGOT-GOT link function enables GT SoftGOT1000 to connect the GOT via Ethernet.

amaya-goodwin
Download Presentation

GOT1000 Series SoftGOT-GOT Link Function for GT15 and GT16 series

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GOT1000 SeriesSoftGOT-GOT Link Function for GT15 and GT16 series

  2. SoftGOT-GOT Link function – Remote Maintenance for GOTs! • The SoftGOT-GOT link function enables GT SoftGOT1000 to connect the GOT via Ethernet. • The function synchronizes SoftGOT1000 data with GOT project data and resource data. • This function is available for: (GT12 not supported yet)

  3. System overview Interlock operations with GOT and SoftGOT⇒ Prevent unexpected behaviors!! Up to 99 GOTs can be monitored on a single PC Worksite Office Ethernet HUB HUB Operationinterlock GT15/ GT16 Data auto upload SoftGOT Serial/BUS/ Ethernet Automatically upload the project data from connected GOTs ⇒ No need to create the project data for SoftGOT!! QPLC Note! FX PLCs will be supported in one of the next development steps (no schedule yet)

  4. Configuration (Connection Type) 1) QBUS/serial connection between GOT and PLC SoftGOT reads/writes devices in a PLC via GOT.(Ethernet Transparent Function) Worksite Office Read/write devicesvia GOT Ethernet GT15/GT16 SoftGOT RS232/RS422/QBUS QPLC

  5. Configuration (Connection Type) 2) Ethernet connection between GOT and PLC SoftGOT reads/writes devices in a PLC by directlyconnecting to the PLC via Ethernet, not via GOT. Office Worksite GT15/GT16 SoftGOT RS232/RS422/QBUS Read/write devicesby directly connecting to PLC QPLC

  6. Features •Project data auto acquisition functionSoftGOT automatically acquires GOT screen data (project data).There is no need to create the project data for SoftGOT. •Alarm data auto acquisition functionSoftGOT automatically acquires the alarm data of GOT. Alarms that are already restored before connecting to SoftGOT can also be viewed. In both functions, the data stored in SoftGOT will be updated every time the SoftGOT is started up. Data Auto Acquisition Function •Operating authorityEither one of SoftGOT or GOT can be operable to prevent the simultaneous operation from both sides that may cause unexpected behaviors. •Operating authority (only GOT side) A mode to make only GOT operable.Until this mode is cancelled on a GOT, SoftGOT is notoperable. OperationInterlock

  7. Operation Interlock – Operating Authority Interlock operations with SoftGOT and GOT to prevent simultaneous operation on both sides. Office Worksite Operation interlock GT15/ GT16 SoftGOT × Not operable(without operating authority) Operable (withoperating authority) QPLC Move operating authority Operation is prohibited on the GOT that had operating authority before. Obtain operating authority on the operating authority acquisition screen × Not operable (no operating authority) Operable (with operating authority)

  8. Operation Interlock – Operating Authority Provides a mode to operate PLC only by GOT to prevent the operating authority from being moved to SoftGOT. If operating authority is enabled… Worksite Office Operation interlock GT15/ GT16 SoftGOT × Operable Not operable QPLC • Not operable until GOT cancels theoperating authority priority • SoftGOT cannot enable/cancel theoperating authority priority The operating authority can be enabled/cancelled only on the GOT side by using switches or utility functions on the GOT.

  9. Required Hardware • All GT15 models plus GT15-J71E71-100 Ethernet module • All GT16 models using integrated Ethernet port • Any Q CPU (only Q!)

  10. Required Software • GT Works 3 V1.10L with • GT Designer 3 V1.10L • SoftGOT1000 3.10L

  11. OS Installation -> GT15/GT16 • TransferextendedOS intoGOT!

  12. GT Designer 3 Project Settings Decide how to use the SoftGOT: • GOT and SoftGOT should always show the same screen: Use PLC Register (D) as Screen switching device! • SoftGOT should act as separate HMI showing different screens as GOT:Use GOT Register (GD) as Screen switching device!

  13. SoftGOT settings • Start SoftGOT1000 and open Communication settings QCPU Ethernet connection QCPU serial or QBUS connection

  14. SoftGOT settings • Test GOT Link Make sure to enter the IP-addressof the GOT (not the PLC!)

  15. SoftGOT settings • Start Monitor • SoftGOT willwork for 2hwithout dongle! • GOT project will be uploadedto SoftGOTautomatically! • Monitoring willstart

  16. Good to know!

  17. Good to know! • Use internal GOT devices to control operation method effectively!

  18. Manual references

  19. This is the first time to have an Ethernet Remote Maintenance function in the GT15/GT16! Let’s got out to customerspromoting and selling it! Thank you for your attention

More Related