1 / 9

GOT1000 - GT15 FTP connection

GOT1000 - GT15 FTP connection. Settings for FTP (file transfer protocol). GOT1000 - GT15 FTP connection. What do you need an FTP server functionality on the GT15 models for? Direct check/edit of data in CF card

quemby-stanley
Download Presentation

GOT1000 - GT15 FTP connection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GOT1000 - GT15FTP connection Settings for FTP(file transfer protocol)

  2. GOT1000 - GT15FTP connection • What do you need an FTP server functionality on the GT15 models for? • Direct check/edit of data in CF card • Files in the CF card within the GOT (e.g. alarms, recipes, and hard copies) can be directly read and written from a personal computer. • No need to visit all factories to collect CF cards from all GOTs when there are multiple GOTs or when a GOT is located far away from the personal computer.

  3. GOT1000 - GT15FTP connection • Required hardware: • Any GT15 model • Ethernet module GT15-J71E71-100 • CF card • Required software: • GT Designer 2 V2.59M • FTP client FFFTP

  4. GOT1000 - GT15FTP connection • Actions required inGT Designer • InstallOption O/S for FTP

  5. Installation of FFFTP-client • Install the software Start the self extracting archive (Software is embedded in this presentation)

  6. Settings in FFFTP-client 2. Enter a new host with the IP address of the GOT 1. Start file „ffftp“

  7. Host setting (General) 1. Enter a profil ename, i.e. „GOT“ 2. Enter the IP address of the GOT 3. Enter the user name like defined in the GT-Designer project (Login Name) 4. Enter the password like defined in the GT-Designer project (Password)

  8. Host Setting (Advanced) 1. Enter the command „gtwr“ to put the GOT in „write“-mode 2. Press „OK“ Without “gtwr”, files could only be uploaded from GOT1000 to PC! Safety measure

  9. 2. Select „Binary Mode“ Connection 1. Press „Connect“

More Related