Ways of working with acrylic

1. Ways of working with acrylic Working with acrylic involves doing a lot of things such as cutting, drilling, polishing and gluing. If you do not know how to go about it, then you will not get the best end result.You have to get it right if you want to succeed when using the acrylic. There are numerous ways in which you can work with acrylic. Here are just some of the ways you can work with acrylic to get the best result. Flame polishing One of the ways that you can work with acrylic is by flame polishing it. In case you cut a piece of clear acrylic but it still looks frosty, you can flam polish it to give it a clearer look. It will not easy at first and you have to keep practicing. You can melt the edges by simply brushing the flame. It will give them a polished appearance.The only thing you have to do is make sure that to only polish areas that you want to glue.By doing so, you will avoid stress of sticking surfaces that you did not want to glue. Cutting You can use plastic scoring blade to make straight cut in your gold acrylic mirror. Make sure that the blade is facing towards you and leave a score guide. You should score the acrylic a number of times on the same line. Once you are done, you should place your acrylic on the table and snap the pieces into two. There are also other ways that you can use to cut acrylic using tools like table saw, band saw and jigsaw. The tools have high tooth count cutting blade. These blades are recommended for cuttingsilver acrylic mirror. Gluing Solvent based glues are the most popular in gluing opal acrylic tubing.Gluing the material will soften it and bonds the two pieces together.If you want to glue using solvent glue, then all you have to do is just squeeze the bottle and apply it on the edge of the acrylic.Put the glue where the two pieces meet. You can also squeeze the applicator lightly and pull the pieces towards you.You

2. can also join the pieces using capillary action. All you have to do is just make sure that you pay attention when gluing to avoid any unnecessary mistakes. Drilling Drilling is one of the ways to use acrylic. Drilling acrylic with wood drill bit, you will only crack it. In case it is a thin sheet, you need to use a step drill.If you are working on a thick piece, then you can use conventional drill bits. These are the ways you can work with the high impact acrylic. Using it the proper way will no doubt get the best results. Whether you want to drill, glue,and polish or cut your acrylic rod, you do not have anything to worry about. All you have to do is just follow the procedure for working with acrylic and you are good to go. P&M Plastics 12 Township Drive,Gold Coast,Queensland 07 55357544 leon@pmplastics http://www.pmplastics.com.au/