1 / 8

DIY : How To Make a Powerful Luminous Laser Diode

A laser diode is something that is some of the first and foremost things you’d be making while taking the feel of the electronic devices. A cheap laser diode driver is something you’d be requiring. Here’s a list of the materials that you need while making a powerful burning laser diode.

analogtechnologies
Download Presentation

DIY : How To Make a Powerful Luminous Laser Diode

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Presents : DIY: How To Make a Powerful Luminous Laser Diode

  2. A laser diode is something that is some of the first and foremost things you’d be making while taking the feel of the electronic devices. A cheap laser diode driver is something you’d be requiring. Here’s a list of the materials that you need while making a powerful burning laser diode.

  3. A powerful laser diode preferably having a data sheet would require: • Capacitors • Diodes • Ohm resistors • Voltage regulator • Veroboard • Soldering iron • Solder • Heat sink • Switch

  4. The laser diode driver circuit contains a laser diode, capacitors which help in protecting Laser Diode from immediate fluctuating power supply especially when switching it on or off. Resistors if placed in parallel, sets the maximum voltage and current that the laser diode would get.

  5. Note: the switch must be placed between the batteries and the driver. First, check if all the components are working properly or not using a multimeter. Place the components making a circuit and check them first on a breadboard. Once you figure out that all the components are working properly, place them on a PCB and solder it. Check the driver by using a bulb. Also, make sure to short your capacitors.

  6. Analog Technologies, Inc. Address : 2352 Walsh Ave. Santa Clara, CA 95051 Phone : 4087489100 Email :sales@analogti.com Website :http://www.analogtechnologies.com/ Thank You

More Related