1 / 13

Variety Of Exterior Paints

Astec have been protecting the exterior of Australian homes for over 32 years with products that have proven to perform in some of the world most extreme coastal and urban environments. Astec Paints provide long term protection to timber, metal, masonry and fibro cement and are resistant to damaging ultra violent radiation and wind driven rain.

Download Presentation

Variety Of Exterior Paints

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Variety Of Exterior Paints

  2. Exterior Finishes Astec have been protecting the exterior of Australian homes for over 32 years with products that have proven to perform in some of the world most extreme coastal and urban environments. Astec Paints provide long term protection to timber, metal, masonry and fibro cement and are resistant to damaging ultra violent radiation and wind driven rain. Substrate movement for whatever reason leads to cracks in masonry walls, Astec elastomeric wall paints bridge these continually moving cracks and remain “Crack Free” throughout the worst ravages of cold winters and hot humid summers. Complete weather protection of Australian homes for over 32 years.

  3. Premium Exterior Paints • Armaflex Gloss Silicone Modified Armaflex Gloss S.M. is a water based, silicone modified 100% pure acrylic, protective and decorative coating that is formulated as non-splatter paint for exterior or interior walls, ceilings and trims. It is a rapid drying material with high film strength that exhibits good early resistance to moisture. • Armaflex Low Sheen Silicone Modified Armaflex Low Sheen S.M. is a water based, silicone modified 100% pure acrylic, protective and decorative coating that is formulated as non-splatter paint for exterior or interior walls, ceilings and trims. It is a rapid drying material with high film strength that exhibits good early resistance to moisture.

  4. Trade Exterior Paints • Solaflex Gloss SolaflexGloss is a modified acrylic emulsion, which has been formulated as a topcoat for aged concrete roofing tiles. The product is designed to prevent moisture accumulating between the substrate and the coating but will also breathe, adapting well to Australia’s harsh freeze-thaw environment. • Suntuff Low Sheen Suntuff Low Sheen is a water based, 100% pure acrylic, protective and decorative coating that is formulated as a non-splatter low sheen paint that is suitable for most exterior applications. It is a rapid drying, high film strength material that exhibits good early resistance to moisture. The formulation dries to a hard, yet flexible film that flows and settles to a smooth low sheen finish offering excellent resistance to environmental dirt pick-up. • Solaflex Low Sheen Solaflex Low Sheen is a modified acrylic emulsion, which has been formulated as a topcoat for aged concrete roofing tiles. The product is designed to prevent moisture accumulating between the substrate and the coating but will also breathe, adapting well to Australia’s harsh freeze-thaw environment.

  5. Preparation Base Coats • BarrierBarrier is an industrial water based anti-mould solution specifically formulated for the maintenance painting and roof restoration industries. It is supplied as a ready to use solution available in 20L plastic drums or as a concentrate available in both 20 Litre plastic drums and 4 Litre plastic containers with a mixing ratio of 1:4 (Add 4 Litres of clean water to every 1 Litre of Barrier Concentrate). • RivettRivett is a clear solvent based solution that offers outstanding sealing and binding powers when used during the restoration process of aged construction surfaces. In addition to its primary use, Rivett has also proved to be an effective first sealer/binder for chalky paint finishes, soft friable masonry walls and any substrate requiring new surface stability prior to the application of an aesthetic or protective finish. • Rus-traintRus-traint is a penetrating, moisture displacing, rust encapsulating inhibitor; manufactured from a scientifically balanced blend of penetrating oils, rust inhibitors, oxygen and moisture resistant resins. When applied directly over rust, it will penetrate the finest pores and cavities in the rust, displacing the trapped moisture and encapsulating the rust as a pigment in the dry film. It converts rust into a micro-pore free, fully functional surface ready for painting.

  6. Tripleflex 3 in 1 Gold An ultra premium product, Tripleflex 3 in 1 Gold is a low odour, exterior grade sealer / primer / undercoat, with good opacity, direct to substrate adhesion and roller splatter resistance. • Multi-SealUnlike traditional solvent based acrylic solutions that contain hydrocarbon solvents, Multi-Seal is a clear water/alcohol/glycol based solution that offers the superior sealing and binding capabilities of traditional solution acrylics without the toxic release of hydrocarbon solvents into the atmosphere. The product does not form a surface film but is designed to penetrate the substrate, rather than coat it. Multi-Seal binds any loose surface particles to a hard finish prior to any topcoat application. • B-16 Red Oxide Anti-Corrosive Primer B-16 Primer is a resin rich anti-corrosive primer manufactured as a concentrate to enable long-term storage without the normal hard settle of the red oxide and zinc phosphate pigments that are normally associated with anti-corrosive primers.

  7. Oil Based Undercoat Oil Based Undercoat is a quick dry, high solids maintenance primer/undercoat that provides a well adhered stain blocking base coat for most acrylic and enamel topcoats on interior or exterior surfaces. • Tripleflex - 3 in 1 A premium product, Tripleflex 3 in 1 is a low odour, exterior grade sealer / primer / undercoat, with good opacity, direct to substrate adhesion and roller splatter resistance. • Enviro-Clean Astec Paints Australasia Enviro-Clean is a water-based formulation designed to clean wax, grease, oil, silicone, automotive exhaust build up and general dirt off most painted and unpainted surfaces.

  8. Crack Bridging Elastomeric Wall Coatings • EC-2000 Dirtguard SM EC-2000 Dirtguard Silicone Modified is a 100% acrylic, elastomeric wall coating designed for the long-term protection, durability and aesthetics of masonry walls. • Energy Star Dirtguard I.R. Elastic Energy Star Dirtguard I.R. Elastic is a crack bridging 100% acrylic elastomeric wall coating that exhibits outstanding exterior durability. This semi-gloss coating has excellent elongation and recovery characteristics that provide a positive waterproof seal for masonry and texture finished walls. • Energy Star EC-100 Dirtguard Silicone Modified Energy Star EC-100 Dirtguard Silicone Modified is a water-based, second generation 100% acrylic waterproof membrane coating with high infrared heat reflectivity. Applied as a liquid, it forms a seamless waterproof membrane in situ on the substrate, offering excellent resistance to ponded water when fully adhered.

  9. Concrete Paving Paints • Epitec Primer (Resist Concrete Sub-Moisture) Epitec Primer is a two component BIS A EPOXY and POLYAMIDE water based epoxy primer designed for the sealing and priming of concrete surfaces. The product is supplied as a Part A and Part B, which are mixed at a 1:1 ratio just prior to application and can be applied to most correctly prepared concrete surfaces. • Energy Star Cool Pave Gloss Energy Star Cool Pave Gloss is a tough, durable water based pavement coating that is tolerant to chemicals released from vehicle engines, transmissions & break systems and offers outstanding resistance to softening and pick-up from hot vehicle tyres. • Energy Star Cool Pave Low Sheen Energy Star Cool Pave Low Sheen is a tough, durable water based pavement coating that is tolerant to chemicals released from vehicle engines, transmissions & break systems and offers outstanding resistance to softening and pick-up from hot vehicle tyres.

  10. Energy Star Cool Pave Non Skid Energy Star Cool Pave Non Skid is a tough, durable water based pavement coating that is tolerant to chemicals released from vehicle engines, transmissions & break systems and offers outstanding resistance to softening and pick-up from hot vehicle tyres. • Sports Coat Sports Coat is a moderately flexible yet hard wearing non-skid top-coat, which is a 100% acrylic coating that has proven to provide excellent exterior weathering. Although the finish looks like a low sheen finish because of the non-skid aggregate, it is actually a full gloss product that is modified to provide good dirt pick-up resistance and washing properties on flooring applications.

  11. Trims Enamels • Satin Enamel Satin Enamel is a premium, high solids maintenance enamel that provides a durable satin finish for both exterior and interior surfaces. The product offers dry hiding power far in excess of many of the commercially available enamels. Its strong, dry film hide is achieved with specially surface treated opacifiers used at maximum concentrations during manufacture. The products outstanding opacity, allows for a single coat applications to be achieved on many substrates that can substantially reduce both material and labour costs. • Gloss Enamel Gloss Enamel is a premium, high solids maintenance enamel that provides a durable ultra gloss finish for both exterior and interior surfaces. The product offers dry hiding power far in excess of many of the commercially available enamels. Its strong, dry film hide is achieved with specially surface treated opacifiers used at maximum concentrations during manufacture. The products outstanding opacity, allows for a single coat applications to be achieved on many substrates that can substantially reduce both material and labour costs.

  12. Colour Cards Astec Paints stay up to date with the latest in fashion colours and offer our clients the ability to select from a colour offering of over eighty thousand brand colours, and with the latest in computer colour matching we offer precise colours to any brand. Trust our Reputation for Quality

  13. Contact Us Astec Paints Australasia Pty Ltd A: Head Office - 22 - 24 Pinn Street, St. Marys, S.A. 5042 P: Post Office Box 321, Melrose Park, S.A. 5039 T: (08) 8297 2000 International: (+61 8) 8297 2000 F: (08) 8297 2555 E:enquiries@astecpaints.com.au W: http://www.astecpaints.com.au/

More Related