1 / 11

Industrial Distribution Meeting June 1 – 2, 2010

Industrial Distribution Meeting June 1 – 2, 2010. CDI Torque Plus Angle. 21 st Century Technology. This wrench will change the way you torque !. How To Set Up and Use. Set wrench on flat surface so that the gyro chip will “zero out” Hold “I” button to turn on

ansel
Download Presentation

Industrial Distribution Meeting June 1 – 2, 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Industrial Distribution Meeting June 1 – 2, 2010

  2. CDI Torque Plus Angle 21st Century Technology This wrench will change the way you torque !

  3. How To Set Up and Use • Set wrench on flat surface so that the gyro chip will “zero out” • Hold “I” button to turn on • Push “U” button to desired torque unit • Use UP or DOWN keys to adjust torque value • Push “U” button until “O” (degrees) is shown • Use UP or DOWN keys to adjust degrees • Push “U” button again to return to previous torque mode • Pull wrench until handle vibrates, target torque has been reached • Push “U” to select “O”, pull wrench until handle vibrates at target degree

  4. As a torque load is being applied, the strain gage flexes, thereby sending milivolts of electricity through the torsion beam then changes in resistance are interpreted by the strain gage and sent to the PC board and on to the display.

  5. Snapped Socket Head Cap Screws Stripped Head Bolts Wheel falls off • All could have been avoided by applying the proper amount of torque • In today’s high tech environment, just “making it tight” is not good enough • In many cases, our own lives literally hinge on the correct application of torque

  6. When applying Torque plus Angle, torque is always applied first, then the angle

  7. Introducing Five New Adjustable Interchangeable Head Torque Wrenches designed for the Wind Power Industry. New Quick Release Head Newton Meter Primary Scale Ft. Lbs. Secondary Scale

  8. Model Numbers, Ranges and Drive Sizes

  9. H.D. Torque and Angle Wrench • Torque plus Angle, no need to buy two wrenches • Massive ¾” dr. Ratchet Head – Rubber Protective Boot • Rugged Aluminum housing protects big Digital Readout • Extra long grip for two handed pulling

  10. New CDI DTT Digital Torque Tester • 4.7” Color LCD Digital Touch Screen • Units of Torque, ft.lbs., in.lb.,Nm, cmkg • Batteries included for power backup • N.I.S.T. traceable cert included • Torque Accuracy ± 0.5% • Tech ID upload • Wrench S/N upload • Memory stores 500 values • Standard USB download cable included

More Related