1 / 37

14a - HSPF Modeling: Hydrology

14a - HSPF Modeling: Hydrology . Virginia Tech Biological Systems Engineering Department 2013 DEQ TMDL Workshop. Model Development Process – Become familiar with the model development process and hydrology model development specifically

aolani
Download Presentation

14a - HSPF Modeling: Hydrology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 14a - HSPF Modeling: Hydrology Virginia Tech Biological Systems Engineering Department 2013 DEQ TMDL Workshop

  2. Model Development Process – Become familiar with the model development process and hydrology model development specifically Preliminary Tasks – Identify tasks performed in preparation for hydrology model development Hydrology Model Construction - Review steps taken in the construction of an HSPF hydrology model Hydrology Model Calibration & Validation – Discuss these essential steps in HSPF hydrology model development Overview/Objectives

  3. Model Development Process

  4. Model Development

  5. Model Development

  6. Preliminary Tasks

  7. Surrogate Watershed Use • Use only if there is no suitable stream gage in the study watershed • Suitability: • Flow Gage period of record • Close proximity to study watershed • Similar area, slope, land use, & soils composition • Develop HSPF model for surrogate, calibrate, & validate • Transfer hydrology parameters to study watershed model

  8. Compare and Contrast

  9. Modeling Periods Selection Sum of monthly ave. flows (cfs) • Dependent on data availability (flow and climate data) • Avoiding “extreme” years, identify 5-year period (consecutive) with high and low seasonal flows

  10. Storms Selection • About 30 storms for calibration, and another 30 for validation • Flow response to precipitation • Seasonal distribution of storms

  11. Flow Partitioning • Measure of stream flow contributed by baseflow • Target range is based on observed data • Used during hydrology calibration

  12. Hydrology Model Construction

  13. HSPF Hydrology Simulation

  14. Hydrology-Building Input • Meteorological Data • UCI File - Parameterization • PWATER & IWATER: PLS and ILS • HYDR: RCHRES and F-TABLES • Hydrologic Calibration/Validation

  15. Key Input Parameters – PWATER

  16. Source: EPA BASINS Technical Note 6 Key Input Parameters – PWATER

  17. PLS • Flags (toggles) • Parameters • State Parameters • Monthly-variable • parameters

  18. ILS • Flags (toggles) • Parameters • State Parameters

  19. RCHRES • GEN-INFO Block • HYD-PARM Blocks • Individual & grouped values

  20. FTABLES

  21. Permitted Discharges & Withdrawals • EXT SOURCES Block • WDM time series • VPDES discharges and withdrawal (observed data)

  22. Hydrology Model Calibration & Validation

  23. Model Calibration • Definition • Adjustment of model parameters to improve accuracy of model results • Objective • Ensure that model parameters accurately represent watershed conditions • Criteria • Model results should “match” observed data • Parameter values should be “consistent” with watershed characteristics

  24. Model Validation • Definition • Assess model performance for periods other than the calibration period • Objective • Ensure that calibrated parameters are appropriate for time periods other than the calibration period • Criteria • Model results should “match” observed data

  25. Calibration/Validation Progression • Hydrology • All components depend on this • Erosion/Sediment (if necessary) • Water Quality Calibration Validation

  26. Hydrology Model Calibration Sequence • Storms • Seasonal Water Balance • Annual Water Balance

  27. Remember - Rainfall Data are not Perfect • Check accuracy of record • Does the rainfall data agree with the observed data • What type of gage was used • Who maintains the instruments and the data • Are the data adequate • Enough stations?

  28. HSPExp • Decision Support System for Hydrology Calibration • DOS based (computer savvy) • Does not: • Help with snow pack • Assist in erosion calibration • Assist in water quality calibration • URLhttp://water.usgs.gov/software/hspexp.html • EPA Technical Note 5Using HSPEXP with BASINS/NPSMhttp://www.epa.gov/waterscience/basins/tecnote5.html

  29. Calibration/Validation Criteria • Total volume • Error in total runoff for the calibration period • Low flow recession • Error in the mean of the low-flow recession rates • 50% lowest flows • Error in the mean of the lowest 50% of the daily mean flows • 10% highest flows • Error in the mean of the highest 10% of the daily mean flows • Storm peaks (not volumes) • Error in flow peaks for selected storms • Seasonal volume • Seasonal volume error (summer June-Aug, winter Dec-Feb) • Summer storm volume • Error in runoff volume for selected summer storms

  30. Calibration/Validation Criteria

  31. Calibration Runs

  32. Hydrology Calibration

  33. Hydrology Calibration

  34. Hydrology Calibration

  35. Hydrology Calibration

  36. Hydrology Calibration

  37. Questions?

More Related