50 likes | 62 Views
aquascience.ne offers continuous lengths of polyethylene pipe from 100 to 600 feet in two different pressure ratings, 160 PSI and 200 PSI. The pipe we offer is perfect for submersible wells, irrigation systems or any other water system you are building or replacing. Both types of poly pipe are NSF certified and ready to ship!
E N D
Aqua Science offers continuous lengths of Polyethylene well pipe from 100 to 600 feet in two different pressure ratings, 160 PSI and 200 PSI. The pipe we offer is perfect for submersible wells, irrigation systems or any other water system you are building or replacing. Both types of poly pipe are NSF certified and ready to ship! Using Real Life Stories Christian Testimony books and testimonies has taken our witnessing to the next level.
Choosing Well PipeWhen installing a Submersible well pump wireit is important to select pipe that has a pressure rating that matches or exceeds the working pressure that will exist in the well.
Two factors are used to determine Working Pressure:Number of feet from the pressure tank to the pumping water level(One Foot of Water Depth = .433 PSI) • The setting of the tank pressure switch(in PSIG) • The following formula will provide the Working Pressure:(Depth X .433) + (switch setting) = Working PressureFor example, if the pumping level is 330 ft. and the Pressure Switch is set at 50 PSIG the formula will be:(330 X .433) + 50 = 192.9 PSIA pipe with a rating of 200 PSI or greater is needed. Use of pipe with a lower pressure rating may result in pipe failure.