E N D
1 Bluslot™ - meshfiltro.com Johnson Slotted Water Well Screen Pipe Well Screen Pipe Can be fully customized to meet any specific well application. They feature strong assemblies, are resistant to erosion, and cannot be plugged by fines or produced solids. An exclusive slip-ring design isolates the water well screent from mechanical loads applied to the screen assembly; i.e., compression, tension, or torque, while maintaining efficient sand control. The typical screen unit arrangements are 32 ft of jacket on 38 ft of base pipe and 16 ft of jacket on 20 ft of base pipe, but any length of handling area for torque tongues can be ordered. The protective shroud can be perforated or louvered and is designed to accommodate a fiber-optic cable. The first three digits of these codes designate the width of the wire in thousandths of one inch, and the last three digits designate the height, also in thousandths of one inch. The wire is available in either stainless steel material or Alloy or carton steel material For special applications, direct wrap (also known as shrink fit) can be made available with the same metal options as the slip-on wrap. In this case, the longitudinal ribs are mounted to the base pipe, and the jacket is wrapped and welded directly over this assembly, providing a very tight shrink fit. This process eliminates the requirement of welding to the base pipe, while creating a base pipe and jacket arrangement that behaves like a single part. Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00 Wedge Wire Width(mm): 2.30 3.00 3.30 3.70 Height(mm): 2.70 3.60 4.70 5.60 6.30 Support Rod From 2.50mm to 6.0mm Round Other specifications available as per request Note 0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request Slot Size Material Galvanized low carton (LCG), stainless steel (304,316 etc.) Up to 6 meters. Length From 25mm to 1200mm. Diameter Plain beveled ends, flanged or threaded couplings End Connection Water wells, mining & Mineral Processing, municipal water supply, refining & petrochemical, water treatment, architecture and construction, etc. Application
2 Bluslot™ - meshfiltro.com Well Screen Pipe Characteristics A continuous slot opening which significantly increases the available open area, thus providing greater access to the water-bearing zone. A “V” shaped profile wire which avoids clogging and ensures an uninterrupted flow. A uniform and efficient well development due to the continuous slot opening. Ladder-like wire welded screens have a strong structure and high open area, as well as an accurate slot dimension. 5. Ladder-like wire welded screens have the features of easy backwashing, last long, safety, and reliability as well as low comprehensive cost. Compared with the perforated tube, the wedge wire screen filter element is more suitable for application in the filter equipment with many impurities and backwash required. Features of Well Screen Pipe Screens with the large open areas are more suitable for the construction of high-quality water wells, oil wells, and gas wells. Low-cost operation Screens with large open area shall favor groundwater filtration. Abundant water will reduce the water level’s down, thus saving energy consumption. Under the same condition, large open area can make the speed of groundwater’s enter into the screen much slower than any other filtration apparatus, which will avoid sand entering into the screen because of high pressure, which reduces the abrasion of the pump. Extending the service life of wells Comparatively, groundwater entering into a screen with the larger open area is much easier than that entering into smaller open area screens. The slow water flow will extend the service life of the wells. BLUSLOT™ Filter Add: Hi-tech Development Zone | Shijiazhuang City 050000 | Hebei Province | China. Email: info@meshfiltro.com | Mob: +86 15227806469 | Fax: +86 311–87221317 | Skype:+86 15227806469 Web:meshfiltro.com
3 Bluslot™ - meshfiltro.com Johnson Well Screen Pipe Shows
4 Bluslot™ - meshfiltro.com