1 / 10

CNC Drill Exercise

CNC Drill Exercise . Last Week. Drill cycle. 1. Position the X and Y to the proper coordinates with a rapid traverse move G00, 2. Position the Z axis to a clearance plane, 3. Feed the tool down to depth, 4. Rapid position the tool back to the clearance point. Fixed or Canned Cycles.

aran
Download Presentation

CNC Drill Exercise

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CNC Drill Exercise

  2. Last Week

  3. Drill cycle • 1. Position the X and Y to the proper coordinates with a rapid traverse move G00, • 2. Position the Z axis to a clearance plane, • 3. Feed the tool down to depth, • 4. Rapid position the tool back to the clearance point

  4. Fixed or Canned Cycles • The programming of repetitive machining operation such as : • Drilling • Tapping • Boring • Reaming

  5. Canned Cycles 6 5 4 3 1 2

  6. Peck Drill G83 ,Q

  7. Drill Exercise * 2 * 2 6 5 1 3 4

  8. G98 Fixed cycle initial Level Return G99 Fixed cycle R- point Level Return M 99 Return From Sub-program O 7901 Program’s Name P 3031 Subprogram Name O 3031 Subprogram

More Related