1 / 6

MAKING A CERAMIC POD

MAKING A CERAMIC POD. You must wedge or knead your clay to remove air pockets that could expand during firing and cause the piece to explode. Step one. Form the clay into two pinch pots that you will then attach together following the score, slip and seal method. Step two.

arawn
Download Presentation

MAKING A CERAMIC POD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MAKING A CERAMIC POD

  2. You must wedge or knead your clay to remove air pockets that could expand during firing and cause the piece to explode. Step one

  3. Form the clay into two pinch pots that you will then attach together following the score, slip and seal method. Step two

  4. Add texture to the piece through incising (cutting in to the clay body) or relief (attaching shallow pieces of clay to the main clay form). Step three Relief design Incised design

  5. Create a small vent hole in the pod to prevent the piece from exploding during firing. Trapped air will expand when heated and cause the piece to explode out. Step Four

  6. Sign your ceramic pieces on the bottom…keep it simple and put the year as well. Ex: AB ‘08 Step Five

More Related