1 / 14

SE207: Modeling and Simulation

SE207: Modeling and Simulation. General instructions. Objectives. To be able to do Simulate systems of various types using analog computers Simulate systems of various types using digital computers( MATLAB +SIMULINK) Study and analyze responses of first and second order systems. Grades.

arden-glenn
Download Presentation

SE207: Modeling and Simulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SE207: Modeling and Simulation General instructions

  2. Objectives • To be able to do • Simulate systems of various types using analog computers • Simulate systems of various types using digital computers( MATLAB +SIMULINK) • Study and analyze responses of first and second order systems

  3. Grades • Lab Reports 8% • Quizzes 7% --------- Total 15%

  4. Attendance • -1% for each unexcused absence • You will not be able to submit the report if you are absent in that lab • All reports must be submitted within one week (Before the start of the next lab) • Food and drinks are not allowed in the lab

  5. Format of the Report • Cover page: includes Name, ID#, title, date, Section • Introduction: • Objectives • Brief description of the experiment or the program • Hardware needed (for the experiments) • Procedure of things to be done • Solution of any problems mentioned in the lab handout • Program listing/ Simulation diagrams/plot of results • Conclusions/comments/observations

  6. SE 207: Modeling and Simulation Lab # 1: Analog Computers

  7. Analog signal • An analog signal are non quantized signals that are define on a time interval of interest. Analog signal Discrete-time signal

  8. Analog computers • Analog computers are electronic devices that performs calculations on analog signals. • Main elements of Analog Computers • Resistors/potentiometers • Capacitors • Operational Amplifiers (Op-Amp)

  9. Analog Computers • Can be used to solve differential equations • Heavily used in World War II for computing trajectories of bombs • Digital computers replace analog computers in simulating systems • analog computers are still used today in some applications • Advantages of analog computers over digital computers • Computation time • Prototyping • New technologies • Single chip analog computers • Digital computers with analog co-processors

  10. Operation Amplifier (Op-Amp) • The op-amp is an electronic component • The op-amp output is K times the input • K is a very large number (typically 1000000) • Op-amps are used in different ways to make different computing elements (summers, integrators,…) K K

  11. Amplifier Feedback resistance Rf Input resistance R1 K ei Equality is assumed when K is very large which will be the case here

  12. Inverter Feedback resistance Rf Input resistance R1 K ei • When Rf=R1 then eo= ─ ei • The circuit acts as inverter ( signing the sign)

  13. Summer Feedback resistance Rf Input resistance R1 K e1 R2 e2 R3 e3

  14. Integrator Feedback Capacitor Cf Input resistance R1 K e1 R2 e2 When the feedback element is a capacitor then the circuit acts as an integrator. The initial condition is specified by the initial charge in capacitor

More Related