Networking with Java 1: The Client Side

1. Networking with Java 1:The Client Side

2. Introduction to Networking

3. Protocols Hi TCP connection request Hi TCP connection reply GET http://www.cs.huji.ac.il/~dbi Got the time? 2:00 <file> time

4. Networking as Layers Application (HTTP, FTP) DATA Transport (TCP,UDP) HEADER DATA Network (IP) HEADER HEADER DATA Link (LINK) HEADER HEADER HEADER DATA

5. TCP (Transmission-Control Protocol) • Enables symmetric byte-stream transmission between two endpoints (applications) • Reliable communication channel • TCP perform these tasks: • connection establishment by handshake (relatively slow) • division to numbered packets (transferred by IP) • error correction of packets (checksum) • acknowledgement and retransmission of packets • connection termination by handshake

6. UDP (User Datagram Protocol) • Enables direct datagram (packet) transmission from one endpoint to another • No reliability (except for data correction) • sender does not wait for acknowledgements • arrival order is not guaranteed • arrival is not guaranteed • Used when speed is essential, even in cost of reliability • e.g., streaming media, games, Internet telephony, etc.

7. Ports • A computer may have several applications that communicate with applications on remote computers through the same physical connection to the network • When receiving a packet, how can the computer tell which application is the destination? • Solution: each channel endpoint is assigned a unique port that is known to both the computer and the other endpoint

8. Ports (cont) • Thus, an endpoint application on the Internet is identified by • A host name → 32 bits IP-address • A 16 bits port • Why don’t we specify the port in a Web browser?

9. Known Ports mail client web browser • Some known ports are • 20, 21: FTP • 22: SSH • 23: TELNET • 25: SMTP • 110: POP3 • 80: HTTP • 119: NNTP Client Application 21 23 25 110 80 119

10. Sockets • A socket is a construct that represents oneend-point of a two-waycommunication channel between two programs running on the network • Using sockets, the OS provides processes a file-like access to the channel • i.e., sockets are allocated a file descriptor, and processes can access (read/write) the socket by specifying that descriptor • A specific socket is identified by the machine's IP and a port within that machine

11. Sockets (cont) • A socket stores the IP and port number of the other end-point computer of the channel • When writing to a socket, the written bytes are sent to the other computer and port (e.g., over TCP/IP) • That is, remote IP and port are attached to the packets • When OS receives packets on the network, it uses their destination port to decide which socket should get the received bytes

12. Java Sockets Low-Level Networking

13. Java Sockets • Java wraps OS sockets (over TCP) by the objects of class java.net.Socket • new Socket(String remoteHost, int remotePort) creates a TCP socket and connects it to the remote host on the remote port (hand shake) • Write and read using streams: • InputStream getInputStream() • OutputStream getOutputStream()

14. A Socket Example import java.net.*;import java.io.*;public class SimpleSocket {public static void main(String[] args) throws IOException { ... next slide ... }}

15. Socket socket = new Socket("www.cs.huji.ac.il", 80);InputStream istream = socket.getInputStream();OutputStream ostream = socket.getOutputStream();String request = "GET /~dbi/admin.html HTTP/1.1\r\n"  + "Host: www.cs.huji.ac.il\r\n" + "Connection: close\r\n\r\n";    ostream.write(request.getBytes());Socket socket = new Socket("www.cs.huji.ac.il", 80);InputStream istream = socket.getInputStream();OutputStream ostream = socket.getOutputStream();String request = "GET /~dbi/admin.html HTTP/1.1\r\n"  + "Host: www.cs.huji.ac.il\r\n" + "Connection: close\r\n\r\n";    ostream.write(request.getBytes()); byte[] response = new byte[4096];int bytesRead = -1; while ((bytesRead = istream.read(response)) >= 0) {System.out.write(response, 0, bytesRead);}socket.close(); Needed for forwarding for example

16. Timeout • You can set timeout values to blocking method read() of Socket • Use the method socket.setSoTimeout(milliseconds) • If timeout is reached before the method returns, java.net.SocketTimeoutException is thrown Read more aboutSocket Class

17. Java Sockets and HTTP

18. HTTP Message Structure Request/Status-Line\r\n Header1: value1\r\n Header2: value2\r\n ... HeaderN: valueN\r\n \r\n Message-Body • A HTTP message has the following structure:

19. Reading HTTP Messages • Several ways to interpret the bytes of the body • Binary: images, compressed files, class files, ... • Text: ASCII, Latin-1, UTF-8, ... • Commonly, applications parse the headers of the message, and process the body according to the information supplied by the headers • E.g., Content-Type, Content-Encoding, Transfer-Encoding

20. An Example

21. Parsing the Headers • So how are the headers themselves represented? • Headers of a HTTP message must be in US-ASCII format (1 byte per character)

22. Example: Extracting the Headers Socket socket = new Socket(argv[0], 80); InputStream istream = socket.getInputStream();OutputStream ostream = socket.getOutputStream();String request = "GET / HTTP/1.1\r\n" + "Host: " + argv[0] + "\r\n" +"Connection: close\r\n\r\n"; ostream.write(request.getBytes()); StringBuffer headers = new StringBuffer(); int byteRead = 0;while ( !endOfHeaders(headers) &&  (byteRead = istream.read()) >= 0) {headers.append((char) byteRead); }System.out.print(headers);socket.close();

23. Example: Extracting the Headers (cont) public static boolean endOfHeaders(StringBuffer headers) { int lastIndex = headers.length() - 1; if (lastIndex < 3 || headers.charAt(lastIndex) != '\n')return false; return (headers.substring(lastIndex - 3, lastIndex + 1).equals("\r\n\r\n"));} • Why did we (inefficiently) read one byte at a time? • Is there any way to avoid this inefficiency?

24. Persistent Connections • According to HTTP/1.1, a server does not have to close the connection after fulfilling your request • One connection (socket) can be used for several requests and responses send more requests • even while earlier responses are being transferred (pipelining) • saves “slow start” time • How can the client know when one response ends and a new one begins? • To avoid persistency, require explicitly by the header Connection: close

25. Parsing URLs

26. Working with URLs Protocol Query Host Name Port Number File Name Reference • URL (Uniform/Universal Resource Locator): a reference (address) to a resource on the Internet http://www.cs.huji.ac.il:80/~dbi/main.html#notes http://www.google.com/search?hl=en&q=dbi+huji&btnG=Search

27. The Class URL • The class URL is used for parsing URLs • Constructing URLs: • URL w3c1 = new URL("http://www.w3.org/TR/"); • URL w3c2 = new URL("http","www.w3.org",80,"TR/"); • URL w3c3 = new URL(w3c2, "xhtml1/"); • If the string is not an absolute URL, then it is considered relative to the URL

28. Parsing URLs • The following methods of URL can be used for parsing URLs getProtocol(), getHost(), getPort(), getPath(), getFile(), getQuery(), getRef() Read more aboutURLClass

29. URLEncoder • Contains a utility method encode for converting a string into an encoded format (used in URLs, e.g. for searches) • To convert a string, each char is examined in turn: • Space is converted into a plus sign + • a-z, A-Z, 0-9, ., -, * and _ remain the same. • The bytes of all special characters are replaced by hexadecimal numbers, preceded with % • To decode an encoded string, use decode() of the class URLDecoder Read more aboutURLEncoder Class

30. Class URLConnection High-Level Networking

31. The class URLConnection • To establish the actual resource, we can use the object URLConnection obtained by url.openConnection() • If the protocol of the URL is HTTP, the returned object is of class HttpURLConnection • This class encapsulates all socket management and HTTP directions required to obtain the resource Read more aboutURLConnection Class

32. public class ContentExtractor {public static void main(String[] argv) throws Exception {URL url = new URL(argv[0]);System.out.println("Host: " + url.getHost());System.out.println("Protocol: " + url.getProtocol());System.out.println("----");URLConnection con = url.openConnection();InputStream stream = con.getInputStream();byte[] data = new byte[4096];int bytesRead = 0;while((bytesRead=stream.read(data))>=0) {System.out.write(data,0,bytesRead);}}}public class ContentExtractor {public static void main(String[] argv) throws Exception {URL url = new URL(argv[0]);System.out.println("Host: " + url.getHost());System.out.println("Protocol: " + url.getProtocol());System.out.println("----");URLConnection con = url.openConnection();InputStream stream = con.getInputStream();byte[] data = new byte[4096];int bytesRead = 0;while((bytesRead=stream.read(data))>=0) {System.out.write(data,0,bytesRead);}}}

33. About URLConnection • The life cycle of a URLConnection object has two parts: • Before actual connection establishment • Connection configuration • After actual connection establishment • Content retrieval • Passage from the first phase to the second is implicit • A result of calling some committing methods, like getDate()

34. About HttpURLConnection • The HttpURLConnection class encapsulates all HTTP transaction over sockets, e.g., • Content decoding • Redirection • Proxy indirection • You can control requests by its methods • setRequestMethod, setFollowRedirects, setRequestProperty, ... Read more aboutHttpURLConnection Class